- ページ 6

実用車 Burley SOLOのPDF 取扱説明書および安全マニュアルをオンラインで閲覧またはダウンロードできます。Burley SOLO 8 ページ。 Child trailers
Burley SOLO にも：取扱説明書および安全マニュアル (15 ページ), パンフレット＆スペック (5 ページ), 取扱説明書および安全マニュアル (12 ページ), インストレーション・インストラクション (2 ページ), 取扱説明書および安全マニュアル (20 ページ), 取扱説明書 (8 ページ), 取扱説明書および安全マニュアル (20 ページ)

To Adjust the Tracking

To adjust the tracking of the stroller wheel (which allows the stroller to roll

straight), loosen set screw with 5/32" hex wrench, adjust the bushing with

a 3/4" wrench. (See the illustration below or above). Turn the bushing until

the wheel is perpendicular to the ground. Test the tracking by pushing the

stroller away from you to make sure it rolls straight. Make any additional

adjustments before putting your child in the trailer.

When aligned tighten set screw.

To Convert from Strolling to Trailering

The wheel must be placed in the up position in order to attach the trailer to

a bicycle. The conversion from "Stroller" (down) position to "Bike trailer"

(up) position, is quick and requires no tools. First, engage the parking brake.

Loosen the wheel pivot assembly knob by turning it counterclockwise, until

the triangular pivot section can be rotated. Swing the wheel up until the

word "BIKE" on the triangular pivot section appears. The arrow should point

at the "B" in "BIKE". Line up the small triangular section with the larger

triangular section (with

"BIKE" printed on it).

Tighten the knob. Now

attach the trailer to your

bike, using your Burley

hitch, retaining pin or

bolt, and safety strap.

B U R L E Y S T R O L L E R K I T O W N E R ' S I N S T R U C T I O N A N D S A F E T Y M A N U A L

Bushing

Set Screw

Shown without wheel

pivot assembly knob