- ページ 8

フィットネス機器 BURLI MAMMOTHのPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。BURLI MAMMOTH 8 ページ。

MAMMOTH SQUAT STAND

Step 3 – Attach Pull-up Bar

Tools Required: Level, Adjustable Wrench, 15/16

Materials Included: Fat/Skinny Combo Pull-up Bar or Single 1.25" Pull-up Bar (1), Hex Bolt (4), Nyloc Nut

(4), Washer (8)

Materials Needed: None

Assembly instructions are the same for both the Fat/Skinny Pull-up Bar and Single

1.25" Pull-up Bar. When attaching the Fat/Skinny Pull-up Bar, the lower of the 2

bars is the one that will be in use. Assemble according to your preference.

Place Pull-up Bar at preferred height near the top of the Upright Posts

2. Attach Pull-up Bar to Upright Posts using 4 Hex Bolts

2.1. Slide Washer over Hex Bolt

2.2. Insert Hex Bolt through outside Upright Post and Pull-up Bar bracket

2.3. Slide second Washer over Hex Bolt

2.4. Fasten Nyloc Nut on Hex Bolt

2.4.1. Note: Leave Hex Bolts loosely fastened

3. Tighten all 4 Hex Bolts using an Adjustable Wrench and 15/16

Socket Wrench