- ページ 7

配管製品 Burlington T30 CHRのPDF 組み立てをオンラインで閲覧またはダウンロードできます。Burlington T30 CHR 9 ページ。 High level flush pipe kit

Tighten the nut, connect the water supply to the cistern.

2: Filter cleaning (Please clean periodically)

Turn off the water supply, screw off the water supply pipe.

Inlet Valve trouble shooting

Problem

Incorrect water level

Incorrect adjustment.

Water supply is closed.

Inlet Valve does not work

The filter is blocked.

The Stop Float has been over adjusted beyond its operational range.

The Inlet Valve fixing nut has not been tightened.

Leakage

Pull out the filter from the Inlet valve.

Reason

Note:

To ensure the full flushing volume of 6.0 litres, and the half flushing

volume of 3.0 litres. We suggest you adjust the height from top of the

adjustment rod to the stop float to be 60mm.

Filter

Clean by rinsing the filter.

Solution

Adjust the Water level correctly as per diagram above.

Open the water supply

Clean the filter.

Adjust the adjustment rod.

Tighten the nut.

3 - 5

Adjustment the rod:

A: By adjusting clockwise the

water level rises and flush

volume increases.

B: By adjusting anti-clockwise

the water level falls and the

flush volume decreases.

Reinstall the filter and the water supply pipe.