ページを印刷するOWNER'S MANUAL B10
Sound results which are not satisfying are not necessarily originating from a loudspeaker defect which can only be
eliminated by a specialist. Sometimes you can easily help yourself.
Problem
There is no sound coming
from one or even both
loudspeakers
The sound seems to lack
bass or imaging diffuse
The bass is very loud and
imprecise
The trebble appears a little
bit too soft
Cabinet Dimension
Weight
Frequency Response
Rated Power Handling
Sensitivity
Rated Impedance (DIN)
Crossover Point
Warranty
Subject to change without prior notice
FIRTS AID MEASURES
Frequent Cause
a) The electronics are still switched off
b) A short circuit or an open circuit in the
wiring
Wrong polarity in the wiring of one of
the channels
The loudspeaker is placed too close
too the walls
The tweeters have not been angled
towards the listening position
TECHNICHAL DATA B10
Width x Height x Depth
per loudspeaker
+/- 3 db
2,83 V / 1 m
with warranty extension
a) Switch on amplifier and/or source
b) Check wiring and restore fault
Swap the plus- and minus lines
of the channel in question
Increase the distance of the
speakers and/or of the listening
position to the walls
Angle the loudspeakers towards
the listening position
6
Corrective Action
220 x 390 x 280 mm
11,5 kg
50 Hz – 24.000 Hz
80 W
87 dB
4 Ohm
2.300 Hz
90 days
3 years