- ページ 7

オーブン Diamond BRIO 43S/X NのPDF 設置 - 使用 - メンテナンスをオンラインで閲覧またはダウンロードできます。Diamond BRIO 43S/X N 12 ページ。 Electric fan ovens
Diamond BRIO 43S/X N にも：設置 - 使用 - メンテナンス (11 ページ), 設置 - 使用 - メンテナンス (12 ページ), マニュアル (12 ページ)

ページを印刷する

PROTECTIVE

EARTH

CONNECTIONS

Connect the appliance to an efficient ground circuit.

Connect the earth conductor to the terminal with

the symbol

next to the main terminal board.

Connect the metal structure of the appliance to the

equipotential node. Connect the conductor to the

terminal with the symbol

of the rear panel.

8. COMMISSIONING

Following

installation

operations, check appliance operation. In the event

of any malfunction, consult the next Paragraph

"Troubleshooting".

ELECTRIC EQUIPMENT

Switch on the appliance as directed in the

instructions and reminders for use given in Chapter

" INSTRUCTIONS FOR USE " and check:

- the current values of each phase.

- the correct operation of the heating elements.

- The regularity that your lights are bright.

- the regularity of operation of the engine

INSTRUCTIONS FOR USE

III.

9. REMINDERS FOR THE USER

VENTILATED OVEN

Ventilated ovens are an innovatory cooking system

for food, allowing to save considerable time and

energy, without altering food features.

Thanks to the forced hot air system, the oven

reaches the required temperature in a very short

time, thus guaranteeing even cooking results, even

under full load conditions.

USING THE APPLIANCE

AND

EARTH

BONDING

placed on the outside

any

maintenance

READ THIS MANUAL CAREFULLY. IT

PROVIDES IMPORTANT INFORMATION

FOR SAFE INSTALLATION, USE AND

MAINTENANCE OF THE APPLIANCE.

THE MANUFACTURER WILL NOT BE

LIABLE FOR ANY DAMAGE OR INJURY

RESULTING FROM FAILURE TO

OBSERVING THE FOLLOWING RULES.

For after-sales service, contact technical assistance

centres authorized by the manufacturer and

demand the use of original spare parts.

The appliance is designed for professional use and

must be operated by trained personnel.

This equipment is designed for cooking food. It is

intended for industrial use. Any other use is to be

considered improper

The first time, the appliance has to be used under

no load conditions, at the highest temperature, to

eliminate any whatever traces of grease, due to

manufacturing.

Prior to using the appliance, it is necessary to pre-

heat the cooking chamber. This is an essential

operation and has to be carried out for at least 10

minutes, every time the oven is used.

Do not leave the appliance unattended while in

operation.

On mechanical models, by presetting the timer, this

automatically switches on the oven and its signal

light, the internal oven light and presets food

cooking time. For digital models, consult the specific

section.

On models " .. . U... " , a pushbutton on the control

panel will allow water supply, to increase degree of

humidity.

In the event of an appliance fault or malfunction

switch the appliance off at the main switch installed

upline.

Clean the appliance following the instructions given

in Chapter " INSTRUCTIONS FOR CLEANING".

DO NOT STORE " AMMABLE MATERIALS

IN CLOSE PROXIMITY TO THE

APPLIANCE. FIRE HAZARD.

Do not obstruct any air vents or drains present on

the appliance.

Do not tamper with appliance components.

Keep this manual in a safe place, known to all users,

so that it can be consulted throughout the working

life of the appliance.

Installation and appliance maintenance must be

carried out by qualified technicians authorized by

the manufacturer, in compliance with current safety

standards and the instructions in this manual.