- ページ 6

オーブン Diamond Diverso WR-FD24-MTのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Diamond Diverso WR-FD24-MT 12 ページ。

 respect the instructions and warnings displayed on the machine

labels.

The labels are accident prevention devices, and therefore must always

be perfectly legible. If these should be damaged and illegible, it is

mandatory to replace them by requesting replacements from the

Manufacturer.

 At the end of each working shift, before cleaning, maintenance or

transfer operations, disconnect electrical power.

WARNINGS FOR THE MAINTENANCE OPERATOR

Observe the instructions indicated in this manual.

 Always use individual safety devices and other protection means.

 Before starting any maintenance operations, make sure that the

oven, it was used, is cooled down .

 If any of the safety devices is worn or faulty, the oven is also

considered faulty and not to be used.

 Disconnect electrical power before intervening on electrical or

electronic parts and connectors.

2 INSTALLATION

Installation must be executed by qualified personnel in compliance with

local, national and European regulations.

The oven is not provided with power supply cable. When connecting the

appliance electrically, an automatic RCD must be interposed with an

opening distance between contacts of at least 3 mm.

appliance electrically it is essential to proceed in the following way:



raise the cover of the terminal block;

- 26 -

To connect the