- ページ 5

浄水器 Aquasana AQ-SFROのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Aquasana AQ-SFRO 13 ページ。 Under sink water filter smartflow reverse osmosis

INSTALLATION STEPS

Sanitize and Install Water Tank

A. Using the included eye dropper, add 3ml bleach into the top of the

water tank.

NOTE: Sanitation step will be completed during the

pressure test and flush step of the installation.

B. From the accessories box, find the plumber's tape roll and water

tank valve.

C. Wrap the plumber's tape around the stainless steel connector

4-5 times.

D. Screw the water tank valve onto the plumber's tape wrapped

stainless steel connector.

E. Hand tighten water tank valve until secure (be sure not to

cross-thread or over-tighten). After you have secured with hand

tightening, tighten with wrench a quarter turn to ensure secure fit.

Turn to the right

Connect Water Tank to Manifold

A. Open water tank valve. Valve should be pointing towards

the valve port.

CLOSED

OPEN

B. Insert one end of the yellow tubing into the

water tank valve.

C. Place water tank on the tank stand in an area

that is near the system manifold.

D. Connect water tank to the system manifold. Do so by connecting the

other end of the yellow tubing to the yellow inlet port on the

backside of the system manifold, labeled, 'tank'.

INSTALLATION STEPS