- ページ 9

自動車 Chrysler 300 2017のPDF クイック・リファレンス・マニュアルをオンラインで閲覧またはダウンロードできます。Chrysler 300 2017 17 ページ。

Speed Control

When engaged, the Speed Control takes over accelera-

tor operations at speeds greater than 25 mph (40 km/h).

Speed Control Switches

1 — Push Cancel

2 — Push Set+/Accel

3 — Push Resume

4 — Push On/Off

5 — Push Set-/Decel

To Activate

Push the on/off button. To turn the system off, push

the on/off button a second time. The system should

be turned off when not in use.

To Set A Desired Speed

Turn the Speed Control on. When the vehicle has

reached the desired speed, push the SET button and

release. Release the accelerator and the vehicle will

operate at the selected speed.

To Deactivate

A soft tap on the brake pedal, pushing the CANC

button, or normal brake pressure while slowing the

vehicle will deactivate Speed Control without erasing

the set speed memory. Pushing the on/off button or

turning the ignition switch OFF erases the set speed in

memory.

To Resume Speed

To resume a previously set speed, push the RES but-

ton and release.

To Increase Speed

When the Speed Control is set, you can increase

speed by pushing the SET (+) button.

To Decrease Speed

When the Speed Control is set, you can decrease

speed by pushing the SET (-) button.

To Accelerate For Passing

Press the accelerator as you would normally. When the

pedal is released, the vehicle will return to the set

speed.

For further information and applicable warnings and

cautions, please refer to your Owner's Manual at