- ページ 3

マルチメーター 3B SCIENTIFIC PHYSICS Escola 30のPDF インストラクションシートをオンラインで閲覧またはダウンロードできます。3B SCIENTIFIC PHYSICS Escola 30 6 ページ。 Analogue multimeter

ページを印刷する

5. Current measurements

The Escola 30 is not permitted to be

used for measurements on low-volt-

age mains distribution equipment,

such as mains sockets, circuit breakers

and fuses etc.

The nominal voltage of the electricity

source must not exceed 30 V and its

nominal current must be no higher

than 3 A.



The multimeter is to be connected

in series with the load on the side

where the voltage with respect to

ground is lowest!



Turn off the circuit before the Es-

cola 30 meter is connected into it.



Connect the side with the lower potential to

the left-hand socket.



Connect the common/ground lead first and

only then the signal lead.

5.1 DC currents (mA=):



Set the rotary switch to the desired DC current

range. If measurements are made when the

magnitude of the variable is unknown, always

select a large measuring range before shifting

down to lower ones.



Set the three-way switch to

zero point is to be set in the centre, to

5.2 AC currents (mA~):



Set the rotary switch to the desired AC current

range. If measurements are made when the

magnitude of the variable is unknown, always

select a large measuring range before shifting

down to lower ones.



Set the three-way switch to



Connect the side with the lower potential to

the left-hand socket.



Connect the common/ground lead first and

only then the signal lead.

6.1 DC voltages (V=):



Set the rotary switch to the desired DC voltage

range.If measurements are made when the

magnitude of the variable is unknown, always

select a large measuring range before shifting

down to lower ones.



Set the three-way switch to

zero point is to be set in the centre, to

6.2 AC voltages (V~):



Set the rotary switch to the desired AC voltage

range.If measurements are made when the

magnitude of the variable is unknown, always

select a large measuring range before shifting

or, if the

down to lower ones.



Set the three-way switch to

Symbols for measuring ranges

mA= DC (unit mA)

mA~ AC (unit mA)

6. Voltage measurements

The Escola 30 is not permitted to be

used for measurements on low-volt-

age mains distribution equipment,

such as mains sockets, circuit breakers

and fuses etc.

The nominal voltage of the voltage

source must not exceed 30 V.

DC voltage (unit V)

or, if the