- ページ 28

ビデオカメラ Panasonic AGDVC20P - 3 CCD DV CAMCORDERのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Panasonic AGDVC20P - 3 CCD DV CAMCORDER 40 ページ。 Agmini-dv camera/recorder
Panasonic AGDVC20P - 3 CCD DV CAMCORDER にも：取扱説明書 (42 ページ), 取扱説明書 (42 ページ)

ページを印刷する

Panasonic AGDVC20P - 3 CCD DV CAMCORDER 取扱説明書

DVC20_Eng.book 28 ページ２００５年１０月３１日　月曜日　午前１０時３６分

Using the DV Cable for Recording

(Digital Dubbing)

By connecting other digital video equipment with DV terminal

and the camera-recorder by using the DV cable (optional) 1,

high-image-quality dubbing can be done in digital format.

≥Set to Tape Playback Mode. (Player/recorder)

Connect the camera-recorder and digital video

equipment with the DV cable.

Set [ADVANCE] >> [REC STDBY] >> [YES]. (Recorder)

≥You do not have to follow this step when the remote control is

used in the digital dubbing.

Start playback. (Player)

Start recording. (Recorder)

Press the [3] button to select [¥/;] icon.

≥Or, without operating step 2

While pressing the [¥REC] button on the remote control,

press the [1] button.

REC

/REW

PLAY

STILL ADV

PAUSE

STOP

Press the [3] button to select the [¥/;] icon again or

press the [;] button on the remote control to stop

recording. (Recorder)

Stop playback. (Player)

Edit mode

A.DUB

FF/

VOL

STILL ADV

To cancel the standby for recording

When the camera-recorder is standby for recording, press the

[4] button and select the [∫] icon.

≥Do not plug or unplug the DV cable during dubbing, or the

dubbing may not be completed properly.

≥If a picture (bilingual video, etc.) containing main sound and

sub sound has been dubbed, select the desired sound by

[SETUP] >> [AUDIO OUT] on playback.

≥Even if you use a device equipped with DV terminals such as

IEEE1394, you may not be able to perform digital dubbing in

some cases. For more information, see the instructions for

equipment connected.

≥Regardless of the menu settings on the recorder, digital

dubbing is carried out in the same mode as the [AUDIO REC]

mode of the playback tape.

≥The images on the recorder monitor may be disturbed, but it

does not affect the recorded images.

≥If a picture containing a copyright protection signal (copy

guard) is recorded by the camera-recorder, the picture is

distorted by mosaic-like patterns at playback.

≥When wide images are input, the display such as the menu

screen or the operation icon is expanded horizontally.

≥While pictures are input from the DV terminal, the operation

icon blinks on instead of appearing from the side of the screen

when you press the [ENTER] button.