- ページ 8
ビデオカメラ Panasonic AGDVC20P - 3 CCD DV CAMCORDERのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Panasonic AGDVC20P - 3 CCD DV CAMCORDER 40 ページ。 Agmini-dv camera/recorder
Panasonic AGDVC20P - 3 CCD DV CAMCORDER にも： 取扱説明書 (42 ページ), 取扱説明書 (42 ページ)
ページを印刷する
DVC20_Eng.book 8 ページ ２００５年１０月３１日 月曜日 午前１０時３６分
Lens cap and grip belt
ª
Attach the lens cap
To protect the lens surface, attach the lens cap.
ª
Adjust the grip belt
Adjust the length of the Grip Belt to the size of your hand.
1
Detach the tip of the grip belt.
2
Adjust the length.
3
Reattach the grip belt.
8
Before using
Attaching the shoulder strap
We recommend that you attach the shoulder strap before going
out of doors to record so as to avoid dropping the camera-
recorder.
1
Pull the end of the shoulder strap through the shoulder
strap holder on the camera-recorder.
2
Fold the tip of the shoulder strap, run it through the
shoulder strap length adjuster, and pull it.
1
≥Pull it out more than 2 cm 1 from the shoulder strap length
adjuster so that it cannot slip off.
Using the LCD monitor
You can record the image while viewing it on the LCD monitor
opened.
1
Press the [PUSH OPEN] button and, at the same time,
bring the LCD Monitor out about 90o in the direction of
the arrow.
PUSH
OPEN
≥The viewfinder will go off.
2
Adjust the angle of the LCD monitor as you prefer.
1 180o
≥It can rotate up to 180o 1 towards the lens or 90o 2
towards the viewfinder.
≥The brightness and color level of the LCD monitor can be
adjusted from the menu.
≥If it is forcibly opened or rotated, the camera may be damaged
or fail.
≥When the LCD monitor is rotated by 180o towards the lens
(when recording yourself), the LCD monitor and the
viewfinder will be simultaneously activated.
2 90o