- ページ 17

ビデオカメラ Panasonic AGDVC20P - 3 CCD DV CAMCORDERのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Panasonic AGDVC20P - 3 CCD DV CAMCORDER 42 ページ。 Agmini-dv camera/recorder
Panasonic AGDVC20P - 3 CCD DV CAMCORDER にも：取扱説明書 (40 ページ), 取扱説明書 (42 ページ)

ページを印刷する

Panasonic AGDVC20P - 3 CCD DV CAMCORDER 取扱説明書

Selecting the remote control mode

If 2 cameras are used simultaneously, set the mode for one pair

of camera-recorder and remote control to [VCR1] and that of

the other pair to [VCR2]. This will prevent interference between

the 2 pairs. (The default setting is [VCR1]. When the coin-type

battery is replaced, the setting will revert to the default [VCR1].)

Setting on the camera:

Set [SETUP] >> [REMOTE] >> [VCR1] or [VCR2].

Setting on the remote control:

STILL ADV

[VCR1]:

Press [D] and [∫] simultaneously. 1

[VCR2]:

Press [E] and [∫] simultaneously. 2

Concerning the coin-type battery

≥When the coin-type battery runs down, replace it with a new

battery (part number: CR2025). The battery is normally

expected to last about 1 year, but it depends on operation

frequency.

≥Keep the coin-type battery out of the reach of children.

≥If the remote control mode of the camera and that of the

remote control do not match with each other, "REMOTE" will

appear. When the remote control is operated for the first time

after the camera is turned on, "CHECK REMOTE MODE"

(

) will appear and operation is impossible. Set the same

-33-

remote control mode.

≥The remote control is intended for indoor operation. Outdoors

or under strong light, the camera-recorder may not operate

properly even within the usable ranges.

≥Within a 1 m (3 feet) range, you can operate the remote

control from beside the remote control sensor (LCD monitor

side) of the camera-recorder.

VOL

PAUSE STILL ADV

STOP

VAR

Before using