- ページ 32

ビデオカメラ Panasonic AGDVC20P - 3 CCD DV CAMCORDERのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Panasonic AGDVC20P - 3 CCD DV CAMCORDER 42 ページ。 Agmini-dv camera/recorder
Panasonic AGDVC20P - 3 CCD DV CAMCORDER にも：取扱説明書 (40 ページ), 取扱説明書 (42 ページ)

ページを印刷する

Panasonic AGDVC20P - 3 CCD DV CAMCORDER 取扱説明書

Menus related to taking pictures

[DATE/TIME]

This switches between date and time indications.

≥The camera-recorder automatically records the date and time

of picture taking on the tape.

≥You can also show or change the date/time indication by

repeatedly pressing the [DATE/TIME] button on the remote

control.

[AUDIO REC]

Switches the audio (PCM audio) recording systems.

[12bit]: Records audio in "12 bit 32 kHz 4 tracks".

(The original audio signals can be kept after the other

audio signals are dubbed.)

[16bit]: Records audio in "16 bit 48 kHz 2 tracks". Audio can be

recorded in higher quality.

(If audio signals are dubbed, then the original audio

signals will be erased.)

[REC LAMP]

Set to [ON] and this turns the recording lamp on during

recording, which indicates that recording is underway. Set to

[OFF] and this does not turn on the lamp even when recording

is underway.

[DISPLAY]

Set to [ON] and the display mode can be switched to all

functions. Set to [OFF] and it can be switched to minimum

display.

[BEEP SOUND]

Set to [ON] and confirmation/alarm beeps are issued as

follows.

1 Beep

≥When you start recording

≥When you turn on the power

2 Beeps

≥When you pause recording

2 Beeps for 4 times

≥When a cassette with its erasure prevention tab set to [SAVE]

is inserted, condensation occurs, and at other times. Check

the sentence displayed on the screen.

[POWER SAVE]

[OFF]:

When about 5 minutes passed without any

operation, the standby mode automatically will

be set. In the standby mode, [;] blinks and it

takes time more than usual to start recording

after you press the recording start/stop button.

[5 MINUTES]: When about 5 minutes passes without any

operation, the camera-recorder automatically

turns off to protect the tape or to prevent the

battery from running down. When you use the

camera-recorder, turn it on again.

≥In the following cases, the power may not turn off even when

set [POWER SAVE] >> [5 MINUTES].

≥When connecting to the AC outlet (When using the AC

adapter)

≥When connecting the DV cable to other equipment

Menus related to playback

[REC DATA]

Set to [ON] and the settings (shutter speed, iris/gain values,

and white balance settings (

recordings are displayed during playback.

≥When the [AUTO/MANUAL/FOCUS] switch is set to [AUTO],

the indication [AUTO] will appear.

≥When there is no data, [---] appears on the display.

≥If the camera-recorder data of the camera-recorder are

played back on other equipment, the settings information is

sometimes not displayed normally.

[AUDIO OUT]

This switches the sound to be played back.

[STEREO]: Stereo sound (main sound and sub sound)

[L]:

Left channel sound (main sound)

[R]:

Right channel sound (sub sound)

Other menus

[INITIAL SET]

When there is a menu that cannot be selected depending on a

combination of functions, set to [YES] for changing the menu

settings back to the initial shipping condition.

(Language setting cannot be back to the initial shipping

condition.)

), etc.) used during the

-24-