- ページ 8

水ポンプ AquaScape AquaJet 15000のPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。AquaScape AquaJet 15000 12 ページ。 Fountain pump

AquaScape AquaJet 15000 クイック・スタート・マニュアル
AquaJet
Fountain Pump
Installation & Maintenance Instructions
1) electrical Safety Aquascape
• Inspect your Aquascape
If damage is found, return the unit to where it was purchased for an exchange.
• Always unplug the Aquascape
routine maintenance.
• Do not operate Aquascape
• Any pond related electrical equipment requires a GFI protected circuit. Always have a
qualified electrician install any electrical outlets. Test your GFI outlet on a regular basis.
• Do not use cord to pull plug from outlet. Grasp the plug and pull to disconnect.
• The Aquascape
enough to reach an outlet close to your pond. Do not splice or remove the pump cord as
this will void any warranty.
• The Aquascape
DO NOT OPERATE DRY!
• KEEP THIS MANUAL—DO NOT THROW AWAY!
Contents:
(1) 2-1 Fountain Head Assembly (AquaJet 1000 and 1500 only)
(1) Double Daisy Fountain Head ( AquaJet 600 only)
(1) Water Bell Fountain Head (AquaJet 600 only)
(1) Divert Valve
(1) Ring Nut (AquaJet 1000 and 1500 only)
(1) Upper Shell
(1) Lower Shell
(1) Pump
AquaJet
AquaJet
AquaForce
AquaJet
Pump comes equipped with a 25' power cord. This should be
AquaJet
Pump has been designed to operate submersed in pond water.
AquaJet Pump
Pump upon arrival for any obvious signs of damage.
Pump electrical supply before any
Pump with a damaged cord or plug