- ページ 4

池のポンプ AquaScape 91013のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。AquaScape 91013 16 ページ。 Solids-handling pond pump
AquaScape 91013 にも：取扱説明書とメンテナンス (16 ページ), 使い方とメンテナンス (16 ページ)

ページを印刷する

1. Installation

• Always operate the pump fully submerged. Failure to do

so will overheat the pump and cause it to fail, thus voiding

the warranty. DO NOT OPERATE DRY.

• Use only in fully assembled state, and be sure that both

the upper and lower cage screens are snapped together.

Failure to operate the pump without the filter cage closed

will allow large debris to enter the pump, causing the

pump to fail and voiding the warranty.

• DO NOT wear loose clothing that may become entangled

in the impeller or other moving parts.

• Keep clear of suction and discharge openings. DO NOT

insert fingers in pump with power connected.

• DO NOT pump hazardous materials or liquids, such as oil,

saltwater or organic solvents.

• DO NOT block or restrict discharge.

• Products returned must be cleaned, sanitized, or

decontaminated, as necessary prior to shipment so as

to ensure that employees will not be exposed to health

Model Number

Maximum Flow Rate (GPH)

Maximum Head Height

Motor Type

Wattage

Amperage

Power Cord Length

Pump Discharge Diameter

Multi-Hose Fitting Diameters

Installation

• The AquaForce Solids-Handling Pond Pump is designed

to be submerged directly into the pond. To maximize pond

circulation, locate the AquaForce pump as far away as

possible from the location of the water entering back into

the water feature (Ex. 1).

• It is recommended that the pump NOT be positioned in

the deepest area of the pond (Ex. 1). This will protect the

fish by preventing the pond from completely draining in the

case of leak in the plumbing or filter. Bricks or stones can

be used, if needed, to raise the pump up off the bottom of

the pond.

AquaForce Solids-Handling Pond Pump Specs

1000

1800

1,070

2,149

10'

16.5'

Asynchronous

160

.51

1.33

25'

1.5" MPT

1", 1.25", 1.5", 2"

Ex. 1

☎

US (866) 877-6637 |

hazards in handling said material. All applicable laws and

regulations shall apply.

IMPORTANT: Aquascape, Inc. is not responsible

for losses, injury, or death resulting from a failure

to observe these safety precautions, misuse or

abuse of pumps or equipment.

AquaForce

Solids-Handling Pond Pump

Specifications

• Input Voltage: 120V AC

• Input Frequency: 60 Hz

• Submersible pump

• For outdoor or indoor use

• Thermally protected

• This pump has been evaluated for use with water only

• Input amps & wattage: see chart below

2700

2,695

14'

Asynchronous

147

1.25

25'

1.5" MPT

1", 1.25", 1.5", 2"

• The AquaForce includes a wide assortment of fittings to

choose from. Select the appropriate fitting(s) needed for

your application.

• The threaded collar, on all of the fittings, enables the

AquaForce pump to be installed and removed without the

need for any tools (Ex. 2). Do not use tools to attach the

fittings onto the pump discharge (Ex. 3). Fittings need to

be hand-tightened only.

Ex.2

☎

CAN (866) 766-3426 | aquascapeinc.com

3600

5200

3,868

5,284

18'

24'

Asynchronous

215

360

1.8

25'

1.5" MPT

1", 1.25", 1.5", 2"

Ex. 3