照明器具 AquaScape 84055のPDF インストレーション・インストラクションをオンラインで閲覧またはダウンロードできます。AquaScape 84055 4 ページ。 Led color-changing fountain light kit
ページを印刷するI N S T A L L A T I O N
LED COLOR-CHANGING
FOUNTAIN LIGHT KIT
Aquascape LED Color-Changing Fountain Lights are developed to provide
an impressive accent to fountains. This instruction manual will guide you
through the proper installation of Aquascape color-changing lighting as
well as recommended maintenance procedures to ensure long-term
effectiveness.
LED Color-Changing
Fountain Light Kit
Item #84055
5
TABLE OF CONTENTS
Introduction ................................................... 1
Contents
...................................................... 1
Recommended Products
Safety Information ............................................. 1
Specifications Chart
....................................... 1
Installation ................................................... 1-2
General Maintenance ....................................... 2
Troubleshooting ................................................ 2
Warranty Information
....................................... 2
☎
Contact Us
For more information about our company or products,
please visit our website at aquascapeinc.com or call
US (866) 877-6637 CAN (866) 766-3426.
Find us on:
FPO
................................. 1
facebook.com/AquascapeInc
youtube.com/aquascape4
twitter.com/AquascapeInc
☎
US (866) 877-6637 |
☎
I N S T R U C T I O N S
Contents - #84055
No.
Description
LED Color-Changing
1.
Fountain Light
Color-Changing
2.
Remote Control
3.
12-Volt Transformer
Recommended Products
Safety Information
WARNING: It is
recommended whenever
working in or near water to
have all electrical devices plugged
into a ground fault interrupter (GFCI)
that has been installed by a licensed
electrician.
• To reduce the risk of electrical shock
or damage to the light, all wiring and
junction connections should be made
per local codes. Requirements may vary
depending on usage and location.
Model
Dimensions
Voltage Min-Max/Tensions Min-Max
Wattage
Lumens
Kelvin Temperature
Color Rendering Index
Beam Angle Spread
Cord Length
Installation
FOUNTAIN CONNECTION
• Connect fountain tubing/pipe to the barb at the base of the light, using a
twisting motion to secure it in place (Ex. 1).
• Run the tubing down the fountain with the light cable (Ex. 2).
FPO
CAN (866) 766-3426 | aquascapeinc.com
FPO
FPO
25' Quick-Connect Lighting
Extension Cable
(#98998)
• The power cable should be protected
at all times to avoid punctures, cuts,
bruises, and abrasion.
• Operating the light fixture outside of the
10.8-15 volt operating range voids the
product warranty and may damage or
shorten the life of the LEDs.
IMPORTANT: Aquascape,
Inc. is not responsible for
losses, injury, or death
resulting from a failure to
observe these safety precautions,
misuse or abuse of pumps or
equipment.
LED Color-Changing Lighting Specs
LED Color-Changing Fountain Light
1.5" diameter x 2.5"H
10.8V-15V
2.5±10%
20 lm (white)
3,000 K (white)
70 (white)
30°
15'
FPO
Ex. 1
1
2
3
Ex. 2