- ページ 3

照明器具 AquaScape AquaBasin SmallのPDF ステップ・バイ・ステップのインストール手順をオンラインで閲覧またはダウンロードできます。AquaScape AquaBasin Small 6 ページ。

ページを印刷する

AquaScape AquaBasin Small ステップ・バイ・ステップのインストール手順

Please see

™

AquaBasin

Ultra

Pump Kit Instructions

for assembly steps

of pump and plumbing.

Installing a

Stone Fountain

™

1) The Small AquaBasin

is designed with one

removable grate for

easy pump access.

Connect the tubing to

the Ultra

™

Pump and

ball valve using the plumbing supplies from the AquaBasin

#98136, #98138, or #98463 sold separately) and then place the pump and plumbing

™

inside the AquaBasin

out the notch on the side of the AquaBasin

™

2) The Small AquaBasin

each corner on top of the AquaBasin

additional option of placing a decorative piece on one of

the corners and running the tubing inside the basin rather

than through the center plumbing port. Depending what

size tubing is being used, a ½" or ¾" hole saw drill bit

will be needed to drill out the hole(s). (See the drawing

on the right.)

3) Next, carefully place the stone item where desired and feed

the tubing through the hole on the bottom of the fountain

and set upright. (*Note – It is recommended to adjust the

water ﬂow of the pump by adjusting the ball valve before ﬁnally placing the stone piece

and covering the top with gravel.) (Fig. 8)

4) Now that everything is in place, you can ﬁnish covering the top with your choice of gravel.

Fig. 6

. The cord from the pump can be run

™

. (Fig. 6 & 7)

is designed with a drill point in

™

. This gives you the

™

Ultra

Pump Kit (items

Optional

4 Drill Points

Fig. 7

Center

Plumbing Port

Fig. 8