- ページ 2

金庫 Chubbsafes AIR HOTEL CEUのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Chubbsafes AIR HOTEL CEU 8 ページ。 For more information, please visit www.chubbsafes.com

It is necessary to install batteries before using the CEU. To do this, remove the four screws on the back of

the unit to reveal the power pack. Install 4 x 1.5V AA size batteries, taking care to observe the correct polarity.

Re-assemble the CEU, ensuring the power pack sits at and no wires are trapped or damaged.

Two di erent codes are required to use the CEU – the CEU Master Code (factory set to 1111) and the CEU

Opening Code (factory set to 2222). Both can be programmed by the individual(s) controlling the installation.

N.B. These are not related to the User and Master codes of the Safe itself.

1. USING THE CEU TO OPEN THE SAFE

Turn on the CEU by pressing the side mounted

switch to the "I" position. The unit will beep and the

display will show "GOOd".

Remove the access panel at the base of the

keypad and connect the CEU to the safe using

the USB connector supplied.

Turn o the CEU by pressing the side mounted

switch to the "0" position.

Input the current CEU Master Code (factory

preset 1111) and con rm by pressing the # key.

The display will show "GOOd".

Input the CEU Opening Code (factory set to

2222) followed by #. The CEU display will show

"OPEn", the safe locking bolts will retract and

the safe opens.