- ページ 7

ビデオカメラ Panasonic WV-NP304のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Panasonic WV-NP304 20 ページ。 Ip video cameras
Panasonic WV-NP304 にも：インストレーション・マニュアル (36 ページ), パンフレット (2 ページ), 取扱説明書 (20 ページ), 参考 (2 ページ), 比較表 (6 ページ), インストレーション・マニュアル (36 ページ), 取扱説明書 (20 ページ), 統合ノート (8 ページ)

ページを印刷する

Audio output button *

Turns on/off the audio transmission (play audio from

the PC on the camera speaker). This button will be

displayed only when "Audio output", "Interactive (full

duplex)" or "Interactive (half duplex)" is selected for

"Audio mode" on the setup menu. ( Setup

Instructions)

The button blinks while the audio transmission is

being carried out except the case of setting to

"Interactive (full duplex)".

When this button is clicked, the button will turn into

the

button and audio from the PC will not be

heard.

Audio volume can be adjusted (Low/Middle/High) by

moving the volume cursor

Notes:

• When a user is using the audio transmission func-

tion with "Interactive (half duplex)" selected, the

receiver button and the transmission button will be

inoperable for the other users. When "Interactive (full

duplex)" is selected, the transmission button is inop-

erable for other users.

• Possible duration of audio transmission is up to 5

minutes per transmission. When 5 minutes have

passed, the audio transmission function will be can-

celed and the audio reception function will automati-

cally be turned on. To turn the audio transmission

function on, click the

• When the camera is restarted, the adjusted volume

level (for both the audio transmission and reception)

will return to the level that had been set on the

[Audio] tab on the setup menu.

( Setup Instructions)

• Actual volume level will change in three steps even

though the volume cursor can be adjusted minutely.

SD recording status indicator

The status of the SD recording can be checked with

this indicator.

When the SD recording starts, this indicator will light

red. When the SD recording stops, this indicator will

go off.

This indicator will be displayed only when "Manual"

is selected for "Save trigger" on the setup menu.

( Setup Instructions)

button again.

!8 Main area *

Images from the camera will be displayed in this

area.

The current time and date will be displayed at the

selected position in the time and date format set on

the setup menu. ( Setup Instructions).

Click a desired point in the main area on the "Live"

page that is to be the center of the angle of view.

The camera moves to adjust the position in order to

set the clicked point as the center when images are

being displayed at 2x or 4x.

*1 Only operable by users whose access level is "1.

Administrator"

*2 Only operable by users whose access level is "1.

Administrator" or "2. Camera control" when "On" is

selected for "User authentication"

( Setup Instructions).

*3 Operable by users who belong to the access level

selected for "Permission level of audio trans./recep."

on the [Audio] tab of the "Image/Audio" page

( Setup Instructions).

Refer to Setup Instructions for further information about

the access level.

Note:

When operated by a lower access level user,

images displayed on the screen may be changed

temporarily. This does not affect operation of the

camera.