- ページ 32

ビデオカメラ Panasonic WV-SP509のPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Panasonic WV-SP509 40 ページ。 Ip video cameras
Panasonic WV-SP509 にも：仕様 (2 ページ), インストレーション・マニュアル (36 ページ), 統合ノート (8 ページ)

ページを印刷する

Configure the network settings

Configure the network settings of the camera using the

Panasonic IP setting software

It is possible to perform the network settings of the camera using the IP setup software on the pro-

vided CD-ROM. When using multiple cameras, it is necessary to configure the network settings of

each camera independently.

If the Panasonic IP setting software does not work, configure the network settings of the camera

and the PC individually on the "Network" page of the setup menu. Refer to the Operating

Instructions (included in the CD-ROM) for further information.

IMPORTANT:

• When using Microsoft Windows 7 or Microsoft Windows Vista, the "Windows Security Alert"

window may be displayed when starting the IP setup software. In this case, disable "User

Account Control" from the control panel.

• For the security enhancement, the MAC address/IP address of the camera to be configured will

not be displayed when around 20 minutes have passed after turning on the power of the cam-

era. (When the effective period is set to "20min" in the IP setup)

However cameras in the initial set mode are still displayed even after 20 minutes.

• Panasonic IP setting software is inoperable in other subnets via the same router.

• This camera cannot be displayed or set with an older version of the IP setup software (version 2.xx).

T o start the Panasonic IP setting software, click the [Run] button next to [IP Setting Software]

from the CD launcher menu window, or double-click on the shortcut icon created after install-

ing the software on the PC.

• The License Agreement will be displayed. Read the Agreement and choose "I accept the term

in the license agreement", and click [OK].

C lick the [Network Settings] button after selecting

the MAC address/IP address of the camera to be

configured.

Note:

• When using a DHCP server, the IP address assigned to the camera can be displayed by click-

ing the [Search] button of the IP setting software.

• When a duplicate IP address is used, the corresponding camera number will be displayed

shaded.

• When the [Access Camera] button is clicked, live images of the selected camera will be dis-

played.

• It is possible to change the "Camera list" display between IPv4 addresses and IPv6 addresses

in accordance with the protocol in use.

• The information displayed can be sorted by clicking the title of each displayed item.