- ページ 24

ビデオカメラ Panasonic WV-SW395のPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Panasonic WV-SW395 40 ページ。 Ip video cameras
Panasonic WV-SW395 にも：仕様 (2 ページ), パンフレット (2 ページ), 比較表 (6 ページ), インストレーション・マニュアル (40 ページ), インストレーション・マニュアル (40 ページ), 統合ノート (8 ページ)

Connection

Caution:

• Before starting connections, make sure that the power connection (24 V AC power cord or LAN cable) is discon-

nected. Failure to observe this may cause fire, electric shock, injury, or damage to the product.

• A READILY ACCESSIBLE DISCONNECT DEVICE SHALL BE INCORPORATED TO THE EQUIPMENT POWERED

BY 24 V AC POWER SUPPLY.

Power cable

8P alarm cable connector

• Power cable

Connect the power cable to the 24 V AC power supply using the 24 V AC power supply connector kit (accessory).

Important:

• The power supply of 24 V AC shall be insulated against 120 V AC (for U.S. and Canada) or 220 V - 240 V AC (for

Europe and other countries).

• Do not cut or process the network cable since the power is superimposed when using a PoE+ device for power sup-

ply. Besides, do not put an excessive weight on connected sections.

Brown

Blue

Green/Yellow

Network cable

Output cable for the

monitor used for

adjustment

External I/O cable

Microphone input cable (white)

Audio output cable (black)

ALARM IN1/DAY/NIGHT IN (black) (EXT I/O 1)

GND (brown)

ALARM IN2/ALARM OUT (red) (EXT I/O 2)

GND (orange)

ALARM IN3/AUX OUT (yellow) (EXT I/O 3)

GND (light blue or green)

Unused (blue)

Unused (purple)

To the power supply (24 V AC, 50 Hz/60 Hz)

GND

LAN cable (category 5e or better, STP*)

* For Europe

Coaxial cable

(BNC)

8P alarm cable (accessory)

To a plug-in power type microphone

To an external powered speaker

To a PoE+ hub, PC, etc.

To the monitor used

for adjustment

To a sensor