- ページ 11

テレビ Panasonic =のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Panasonic = 29 ページ。 Color television
Panasonic = にも：取扱説明書 (36 ページ), セットアップマニュアル (5 ページ)

ページを印刷する

Audio Setting

Adjustment to each speaker

Press [VOL] (PUSH SEL:

Select) to open the menu.

Press [VOL] (PUSH SEL: Select) to

select a mode to be adjusted.

Turn [VOL] clockwise

or counterclockwise to

adjust.

Notes:

• The sequence and contents of setting items may

depend on the conditions of devices to be connected.

For further information, refer to the System Upgrade

Guidebook or the instruction manuals for the devices

to be connected.

• To return to the regular mode, press [DISP].

• If no operation takes place for more than 5 seconds in

audio setting (2 seconds in the volume adjustment),

the display returns to the regular mode.

• The volume can also be adjusted directly using [VOL]

on the main unit.

(

page 10)

• Please refer to page 11 for SQ selection.

Volume Adjustment

(Setting range: 0 to 40, Default: 18)

 : Up

 : Down

Bass Adjustment

(Setting range: 12 dB to 12 dB, 2 dB Step, Default:

Bass 0 dB)

 : Up

 : Down

Treble Adjustment

(Setting range: 12 dB to 12 dB, 2 dB Step, Default:

Treble 0 dB)

 : Up

 : Down

Note: Setting of SQ, bass/treble and volume are

inﬂ uenced one another. If such an inﬂ uence mentioned

above causes distortion to the audio signal, readjust

bass/treble or volume.

CQ-C3305W

Balance Adjustment

(Setting range: L (left) 15 to R (right) 15 and Center,

Default: Center)

 : Right enhanced

 : Left enhanced

Fader Adjustment

(Setting range: R (rear) 15 to F (front) 15 and Center,

Default: Center)

 : Front enhanced

 : Rear enhanced

Function Setting

Hold down [VOL]

(PUSH SEL: Select) for

2 sec. or more to open

the menu.

Press [VOL] (PUSH SEL: Select) to

select a mode to be adjusted.

Turn [VOL] clockwise

or counterclockwise to

adjust.

Notes:

• The sequence and contents of setting items may

depend on the conditions of devices to be connected.

For further information, refer to the System Upgrade

Guidebook or the instruction manuals for the devices

to be connected.

• To return to the regular mode, press [DISP].

• If no operation takes place for more than 5 seconds in

function setting, the display returns to the regular mode.

Demonstration

You can set up the monitor to display or hide the

demonstration screen.

 : On (Default)

 : Off

Note: Button operation with either the main unit or

remote control allows users to cancel the demonstration

screen for 20 seconds and enable the selected operation

even in the demo-on mode.

Key Color Selection

You can select key color.

Default: GREEN (Green)

Variety: GREEN (Green), RED (Red)

 : Green (Default)

 : Red

Level Meter Display Patterns (PATTERN)

Variety: 4 types, OFF

: Off

: Pattern 1 (Default)

: Pattern 2

: Pattern 3

: Pattern 4

Mute/Attenuation

You can select mute or attenuation.

 : Volume down by

10 steps

 : Volume off (Default)

AUX1 Skip

If AUX1 is not used, the AUX1 mode is skipped when

selecting the source.

 : On (Skip disabled.)

(Default)

 : Off (Skip enabled.)

CQ-C3305W