- ページ 30

テレビ Panasonic =のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Panasonic = 36 ページ。 Color television
Panasonic = にも：取扱説明書 (29 ページ), セットアップマニュアル (5 ページ)

ページを印刷する

Programming The Universal Remote Control

VCR

Preferred Procedure - Code Known

Programming Universal Remote Using In-

fra-Red Access Codes for VCRs

•

Determine

brand of VCR.

• Identify code(s)

associated with the brand

in the

infra- red code index for VCRs (located in

this

manual).

Procedure

1. Place the

Remote TV/CABLE switch

into the

position

(Left).

TV/CABLE

rnLJ

Press

and

hold VCR POWER button down

Universal Remote.

VCR

POWER

c=J

3. Enter two

digit

code

using keyboard

through 9"

buttons.

The Universal Remote is now

programmed.

NOTE: Some

brands

have

multiple

codes.

Repeat

procedure

using each

code listed

until

VCR

responds

correctly.

Alternate Procedure - Code Unknown

Programming Universal Remote Using the

"Sequence Method" for VCRs

•

Confirm

VCR is

plugged

and operating

properly,

then turn OFF.

Procedure

1. Place the

Remote TV/CABLE switch

into the TV

position

(Left).

Press and hold the VCR POWER

button

down

Universal

Remote.

3. Press VOL RIGHT button repeatedly. Check for the

VCR to turn ON after each press. Stop

pressing

the

button when the VCR turns ON. The proper infra-red

code has now been accessed.

NOTE:

It may take several attempts before the correct code

found.

The VOL LEFT button can be used to return to a

code that was

accidently

passed

by.

3. Some Remote Controls may have unique operating

functions for some buttons. For Example: The

POWER button may only turn the VCR OFF as

opposed to both ON and OFF. It will then be

necessary to

modify

the

procedure.

Turn the VCR

ON and

repeatedly

press the VOL RIGHT button

until

the VCR turns OFF.

Cable Converter Box

Preferred Procedure - Code Known

Programming Universal Remote Using Infra-

Red Access Codes for Cable Television

Converter Boxes

•

Determine

brand

of Cable Television

Converter box.

• Identify code(s) associated

with

the

brand

in the

infra- red code index for Cable

Television Converter

boxes (located in

this manual).

Procedure

Place

the

Remote TV/CABLE switch

into the CABLE

position (Right).

TV/CABLE

[Jjj]

2. Press

and hold

the CABLE POWER button down on

Universal Remote.

~~:~~

c=J

Enter

two

digit

code

using

keyboard "0 through

9" but-

tons.

Release CABLE power button. The Universal

Remote is now

programmed.

Use the Remote

CHANNEL UP/DOWN buttons for selecting Cable

Converter Box channels.

NOTE: Some brands have

multiple codes. Repeat

procedure using each code listed

until Cable

Television

Converter box responds

correctly.

Alternate Procedure - Code Unknown

Programming Universal Remote Using the

"Sequence Method" for Cable Television

Converter Boxes

•

Confirm Cable Television

Converter box is plugged in

and

operating properly,

then turn OFF.

Procedure

1. Place the Remote TV/CABLE switch into the CABLE

position (Right).

2. Press and hold the CABLE POWER button down on

Universal

Remote.

3. Press VOL RIGHT button repeatedly. Check for the

Cable Television Converter box to turn ON after each

press. When the Cable

Television

Converter box turns

ON, release

Cable Power

button.

The proper infra-red

code has now been accessed.

NOTE:

• It may take several attempts before the correct code is

found.

• The VOL LEFT button can be used to return to a code

that was accidently passed by.

• Some Remote Controls may have unique operating

functions for some buttons. For Example: The POWER

button may only turn the Cable

Television

Converter box

OFF as opposed to both ON and OFF. It will then be

necessary to modify the procedure. Turn the Cable

Television

Converter box ON and repeatedly press the

VOL RIGHT button until the Cable Television Converter

box turns

OFF.

NOTE: When operating equipment

(TV,

VCR or Cable Converter box) with the Universal Remote

Control,

the TV/CABLE

switch should be set to the same position where the Access Code was first programmed for the

equipment.

Otherwise,

leave the switch in the TV position.

-30-