ページを印刷するOP_ONAL
EQUIPMENT CONNECTIONS
2 Tuner Picture
in Picture (PIP) Operation
PIP Operation
with a VCR and a Cable Box
This television
includes
a two tuner Picture
In Picture
(PIP) feature.
This allows
watching two (2) live broadcasts
at the
same time without
or with an external
video source
(VCR).
Without
a VGR (External
Video
Source)
Procedure
1.
Connect incoming cable to antenna (ANT) input on back of TV.
2.
Press the PIP button on the Remote Control to display the PIP frame.
Note:
Audio is for the Main Picture (left) only.
3.
Choose channels for the PIP frame by pressing the Remote control PIP CHANNEL
up/down buttons.
4.
Choose channels for the main Picture by pressing the Remote Control CH up/down buttons or by using the numeric keypad.
With a VCR (External
Video
Source)
and Cable Box
Connect your television to a VCR and Cable Box, as shown,
CONNECTIONS
ON BACK OF "IV
COMPONENT
R-- AUDIO--
L
VIDEO
INPUT
TO AUDIO
up
[
®
®
PR--
PB--
YNIDEO
,.POT1
®
®
®
@
CABLES NOT SUPPLIED
VCR
CABLE BOX
Incoming Cable
Note:
The Remote Control must be programmed with supplied codes to operate the VCR and Cable Box.
Procedure
Press the PIP button on the Remote Control to display the PIP frame.
To view scrambled
channels
through
your Cable Box in the PIP frame:
1.
Press the TVNIDEO
button on the Remote Control to select the same video input to which your VCR is connected.
2.
Verify the CABLE BOX and VCR are ON and the VCR tuned to channel 3.
3.
Choose channels for the PIP frame by pressing the CBL button on the Remote Control and using the numeric keypad or PIP
CHANNEL up/down buttons.
4.
Choose channels for the Main Picture by pressing the TV button on the Remote Control and using the numeric keypad or CH
up/down buttons.
Note:
The SWAP button switches the on screen PIP and Main Picture source. Press the RECALL button for PiP and Main Picture
source status.
8