- ページ 9
スピーカー Diamond Audio MOTORSPORT MP525のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Diamond Audio MOTORSPORT MP525 12 ページ。 Pro audio horn coax drivers
ページを印刷する
TWEETER DIAPHRAGM REPLACEMENT - REASSEMBLY
Phase Plug
Gently take the "NEW" Tweeter Diaphragm Assembly
and put the Phase plug you just removed onto it.
BE CAREFUL not to damage the NEW Titanium
Diaphragm assembly.
Soldering
Iron
Using a DVM (or AA battery) make sure that
the tweeter is actualy connected. "Pop" it a
couple times or read the impedance (8 W)
Once tested then finish putting the back cover
on with the stainless 4mm hex head hardware
you removed in the beginning.
Gently take the "NEW" Tweeter Diaphragm Assembly
and put the Phase plug you just removed onto it.
BE CAREFUL not to damage the NEW Titanium
Diaphragm assembly.
Tweeter Diaphragm
Assembly
Get the Back cover and Re-Solder the tweeter wires.
Make sure to connect the wire correctly both the
positive (+) and negative wire from the back cover (-)
Tweeter Diaphragm
Assembly
60/40 Solder
Allen Wrench
9