- ページ 4
バスルーム設備 AquaSource 873-W4804のPDF マニュアルをオンラインで閲覧またはダウンロードできます。AquaSource 873-W4804 13 ページ。 Tub and shower faucet
ページを印刷する
ASSEMBLY INSTRUCTIONS
1.
Prepare the bath area for installation:
a. Shut off the water supply to the tub and shower.
Note: This may require shutting off the main water
supply to your home.
b. Verify that the hole sizes and positions in the
wall are correct. There are the recommended
component measurements:
– Shower and Spout Outlet Hole: 1-1/4 in.
diameter
– Valve Access Hole: 6 in. diameter
– Recommended Valve Depth to Finished Wall:
2 in. min. to 2-1/2 in. max. Ensure that the
black template plate's surface is
exterior surface of the wall. Position
the valve body correctly in the wall. The 8 in.
minimum from the valve body to the tub spout
is required for proper operation.
2.
Remove existing shower valve. Clear any debris from
the shower and bath area. Clean old sealant from any
threaded connections.
1
with the
2
4
1 1/4in. Dia
in.
30
Shower Only
in.
48
Tub&Shower
6in. Dia
48in.
Shower Only
8in. Min.
30in.
1 1/4in. Dia
Tub&Shower
Lowes.com