- ページ 3

カー・ステレオ・システム Diamond Audio DAST12のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Diamond Audio DAST12 13 ページ。 Powered active spare tire subwoofer

ページを印刷する

FEATURES / FUNCTIONS

A.POWER STATUS LED

There is a GREEN "power" LED that glows

green when power is on and no problems are

present. If the protection circuit (PRO) comes

on, it will illuminate the other LED RED

B.REMOTE LEVEL CONTROL PORT

You MUST use the Remote Control as this is

used to set up level and See G on its functions

Note: Please connect the remote terminal

to the remote output of head unit as in

Fig.4. When you hear the unit turn ON/OFF

there should be a very slight POP noise

from the subwoofer.

AUTO POWER CIRCUIT

The AUTO POWER circuit is for high level

(speaker-level) connections. When the speaker

level connections are used AND the remote

turn on wire is NOT used the subwoofer will

AUTO POWER ON when signal is detected.

If the ampliﬁer detected no signal input, the

ampliﬁer will auto turn off.

Ø14.2" /360mm

FUSE

GND

+12V

REM

POWER

5.9"/150mm

AUTO

POWER ON

OFF

REMOTE

L+

L-

R-

L-

R+

R-

R+

L+

LOW

INPUTS

C.HIGH LEVEL (speaker level) INPUTS

If your head unit does not have RCA outputs

you can use the speaker outputs for the audio

source for the subwoofer. Use the supplied

cable and wire harness and connect the

outputs properly as shown in the connection

diagram in this manual (FIG2, PG5)

NOTE: NEVER CONNECT BOTH RCA AND

SPEAKER INPUTS SIMUALTANEOUSLY!!

D.LOW LEVEL RCA INPUTS

Low level inputs are the recommended way

to introduce the audio signal to the subwoofer.

IF RCA outputs are present on your head unit

or other signal source (such as a sound

processor - see FIG 1, PG4).

E.FUSE

Do not use a fuse with a different value

and NEVER replace the fuse with a wire

or coin. The fuse is there to protect the vehicle

NOT the amplifer/subwoofer.