- ページ 16

インバーター AQUASTREAM ABSC02782のPDF インストレーション、オペレーション＆メンテナンスマニュアルをオンラインで閲覧またはダウンロードできます。AQUASTREAM ABSC02782 20 ページ。

Operation of the In-Shower Control

On/Off Key

ON/OFF K ey is used to turn the steam generator

on/off.

Press On/Offkey to turn steam generator on.

Press a second time to turn steam generator off.

A built-in timer automatically shuts the steam

generator offa predetermined period of time

after it has been started, unless the user does so

manually.

The "Display" indicates the S et Point temperature.

Pause Key

Pause key is used to turn the steam generator offmomentarily.

Press Pause key to activate stand-by mode. Press a second time to resume normal function.

The "Set Point" indicator will flash on the function panel when Pause feature is activated.

Scroll Up & Scroll Down Keys

Up & Down arrow keys are used to set ambient temperature.

Pressing and holding keys will increase or decrease the current temperature setting.

The new and desired temperature setting ("S et Point" value) will remain for 5 seconds on the LE D display as

a confirmation of the new value you have selected.

The "Set Point" indicator shows the desired temperature, NOT the actual temperature.

Temperature can be adjusted in 1˚ F (0.5˚ C) increments from 105-120˚F (40.0- 49.0°C).

When ambient temperature is 1˚ F (0.5˚ C) lower than the S et Point, the heater automatically comes on

until the temperature reaches Set Point plus 1˚ F (0.5˚ C).

Care Tips for Controls

1. Use only mild soap and water on a soft cloth to clean the control.

2. Do not use abrasive cleansers

caution

Do not route the control or temperature sensor wiring inside conduit together with power

lines or close to hot water or steam piping. Doing so may result in an inoperative or hazardous installation.

Do not alter or modify the control. Doing so may result in an inoperative or hazardous installation.

Residential Steambath Generator Systems

Display

Key

aquabrass.com