- ページ 3

カースピーカー Diamond Audio Technology D662のPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Diamond Audio Technology D662 8 ページ。 D6 series convertible speakers

D6 CONVERTIBLE SPEAKER SYSTEMS

FEATURES

• Hard Annodized Aluminum Cone

• Rubber Surround

• High Density Proprietary Composite Frame

• Flat Progressive Spider

• Inductively Controlled Motor Design

• Rubber Boot Magnet Protector

• Model Specific Crossovers

Step 1 - Remove Boot

Carefully remove the rubber

boot from the magnet.

Step 2 - Unscrew Phase Plug

Twist phase plug in a counter-

clockwise direction.

Step 3 - Assemble Tweeter Post

Carefully feed the tweeter wires through

the holes and snap tweeter into place on

top of the post .Secure with screw.

Firmly grasp the

tweeter post and turn

to unlock until you

feel a "click".

CONVERTIBILITY

Your new D6 speaker system has the unique ability to

be used as either a component or a coaxial speaker.

Depending on your installation requirements, the tweeter

can be installed separately or mounted directly to the

midbass/midrange unit with the supplied kit. This

provides for the most installation flexibility possible.

See the drawing below for more details.

Removing the Tweeter

Step 4 - Attach Tweeter

Carefully feed the tweeter wires through

the post and through the magnet.

Step 5 - Attach Tweeter Wires

Attach the tweeter wires to their

Step 6 - Carefully Replace Boot

Carefully replace the motor boot to

cover and protect the tweeter wires.

After you feel the "click" of

the tweeter post unlocking,

carefully pull the post straight

up from the cone.

proper terminals.