- ページ 9

水ポンプ Aquasub engineering ADP 03TのPDF 操作マニュアルをオンラインで閲覧またはダウンロードできます。Aquasub engineering ADP 03T 15 ページ。 Submersible dewatering pump. texmo adp series

MAINTENANCE

For uninterrupted performance, planned maintenance and inspection

are indispensable. Please follow below guidelines while maintaining or

inspecting the pump.

MAINTENANCE PRECAUTION

Disconnect the power supply before starting maintenance or inspection of

the pump to avoid electrical shock.

Ensure the pump is intact, free from damage and has no loose components.

Use appropriate tools for executing maintenance, or it may lead to

component damage or personal injuries.

If you find any damages or abnormalities like vibration, noise, smell etc. in the

pump, switch off the pump and contact the dealer where this pump was

purchased or the "AQUASUB ENGINEERING's" sales office in your area for

proper maintenance.

REVERSE FLUSHING OF THE PUMP

It is a simple procedure to clean impeller and casing by forcing water

by an external pump

procedure once in a week to have long trouble free operation.

OIL INSPECTION AND CHANGING

INSPECTING OIL : It is recommended to

inspect the oil for every 1000 Hrs of

usage, or once in six months whichever

is earlier. Remove the drain plug by a

screw driver and take out a small

amount of oil by slightly tilting the

pump. If the oil looks like milky or

intermixed with any other content, the

oil is contaminated.

It may be due to the failure of sealing system, which should be repaired

immediately. It can be solved by disassembling the pump and replacing

relevant components and replacing oil.

REPLACING OIL : It is recommended to change the oil for every 2000 Hrs of

usage, or once in a year whichever is earlier. Drain oil completely then pour 0.3

litres of "SAE 20/40 OIL (coolant oil)" or "PENTAGON COOLCUT S OIL" and

close the drain plug.

from delivery side. It is recommended to follow this