- ページ 6

アクセサリー Diamond Kinetics DKST01のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Diamond Kinetics DKST01 11 ページ。

You can calibrate your sensor at any time, once you have initiated a session.

To do so, Select Calibrate on the top left side of the app.

Set your bat on the plate so that it matches the illustration. Stand at a normal

distance from the plate and align your back foot to be even with the middle point

on the plate.

Select Start Calibration on the bottom right of the app. You will need to

complete the initial sensor calibration within 8 seconds.

Capturing Swings

Get to your natural load point. Do not move the bat excessively when capturing

swings.

Battery Life and Power

Turning Sensor On: Press the DK logo on the top of the sensor to turn it on.

You will see a green light

Flash rapidly if not paired. Flash slowly

Determine Battery Charge: A battery indicator is listed at the the top of the

screen when you are paired with the app and collected session data ; It will alert

you when the battery is low.

Sleep Mode: The sensor will go into sleep mode and the light will stop blinking if

you have not used it for seconds. It will automatically wake up and the green

power light turn once the sensor is picked up.

Turning Sensor Off: Press and hold the button on the top of the sensor to turn it

off.

The battery will last up to 7 hours with continuous use.

Memory

The SwingTracker sensor will collect about 125 swings between data uploads.

SWINGTRACKER APP

Downloading the Mobile App

August 2014