- ページ 12
デジタルカメラ Panasonic DMC-FT3のPDF 基本取扱説明書をオンラインで閲覧またはダウンロードできます。Panasonic DMC-FT3 36 ページ。
Panasonic DMC-FT3 にも： 基本取扱説明書 (36 ページ)
ページを印刷する
∫ Handling of the camera
•
Waterproofing is not guaranteed if the unit is subject to an impact as a result of
being hit or dropped etc. If an impact to the camera occurs, it should be
inspected (subject to a fee) by a Panasonic's Service Centre to verify that the
waterproofing is still effective.
•
When the camera is splashed with detergent, soap, hot spring, bath additive,
sun oil, sun screen, chemical, etc., wipe it off immediately.
•
Waterproof function of the camera is for sea water and fresh water only.
•
Any malfunction caused by customer misuse, or mishandling will not be covered
by the warranty.
•
The inside of this unit is not waterproof. Water leakage will cause malfunction.
•
Supplied accessories are not waterproof (excluding strap).
•
Card and battery are not waterproof. Do not handle with a wet hand. Also, do not
insert wet card or battery into the camera.
•
Do not leave the camera for a long period of time in places where temperature is
very low (at ski resorts or at high altitude etc.) or very high [above 40 oC
(104 °F)], inside a car under strong sunlight, close to a heater, on the beach, etc.
Waterproof performance may be degraded.
∫ About the [Precautions] demonstration display
•
[Precautions] is displayed when the power is turned on for the first time after
purchase, with the side door completely closed.
•
Please check beforehand to maintain the waterproof performance.
1
Press 2 to select [Yes], and press [MENU/SET].
•
It will automatically skip to the clock setting screen if [No] is selected before
it starts.
2
Press 2/1 to select the picture.
2: Return to the previous screen
1: View the next screen
•
It can be forcefully ended by pressing [MENU/SET].
•
When it is forcefully ended while checking by turning the unit off or pressing
[MENU/SET], [Precautions] is displayed every time the power is turned on.
3
After the final screen (12/12), press [MENU/SET] to finish.
•
When [MENU/SET] is pressed after the final screen (12/12), [Precautions]
is not displayed from the next time the power is turned on.
•
This can also be viewed from [Precautions] in the
12
VQT3L33 (ENG)
[Setup]
menu.