- ページ 7

スイッチ HP 10508-VのPDF 仕様をオンラインで閲覧またはダウンロードできます。HP 10508-V 42 ページ。 10500 series
HP 10508-V にも：データシート (20 ページ)

ページを印刷する

QuickSpecs

Overview

Dynamic Host Configuration Protocol (DHCP)

simplifies the management of large IP networks and supports client and server; DHCP Relay enables DHCP operation across

subnets

Domain Name System (DNS)

provides a distributed database that translates domain names and IP addresses, which simplifies network design; supports

client and server

Layer 3 routing

Static IPv4 routing

provides simple manually configured IPv4 routing

Routing Information Protocol (RIP)

uses a distance vector algorithm with UDP packets for route determination; supports RIPv1 and RIPv2 routing; includes loop

protection

Open shortest path first (OSPF):

delivers faster convergence; uses this link-state routing Interior Gateway Protocol (IGP), which supports ECMP, NSSA, and MD5

authentication for increased security and graceful restart for faster failure recovery

Intermediate system to intermediate system (IS-IS)

uses a path vector Interior Gateway Protocol (IGP), which is defined by the ISO organization for IS-IS routing and extended by

IETF RFC 1195 to operate in both TCP/IP and the OSI reference model (Integrated IS-IS)

Border Gateway Protocol 4 (BGP-4)

delivers an implementation of the Exterior Gateway Protocol (EGP) utilizing path vectors; uses TCP for enhanced reliability for

the route discovery process; reduces bandwidth consumption by advertising only incremental updates; supports extensive

policies for increased flexibility; scales to very large networks

Policy-based routing

makes routing decisions based on policies set by the network administrator

IP performance optimization

provides a set of tools to improve the performance of IPv4 networks; includes directed broadcasts, customization of TCP

parameters, support of ICNP error packets, and extensive display capabilities

Unicast Reverse Path Forwarding (uRPF)

limits erroneous or malicious traffic in accordance with RFC 3074

Static IPv6 routing

provides simple, manually configured IPv6 routing

Dual IP stack

maintains separate stacks for IPv4 and IPv6 to ease the transition from an IPv4-only network to an IPv6-only network design

Routing Information Protocol next generation (RIPng)

extends RIPv2 to support IPv6 addressing

OSPFv3

provides OSPF support for IPv6

IS-IS for IPv6

extends IS-IS to support IPv6 addressing

BGP+

extends BGP-4 to support Multiprotocol BGP (MBGP), including support for IPv6 addressing

Multiprotocol Label Switching (MPLS)

uses BGP to advertise routes across Label Switched Paths (LSPs), but uses simple labels to forward packets from any Layer 2 or

Layer 3 protocol, thus reducing complexity and increasing performance; supports graceful restart for reduced failure impact;

supports LSP tunneling and multilevel stacks

Multiprotocol Label Switching (MPLS) Layer 3 VPN

allows Layer 3 VPNs across a provider network; uses MP-BGP to establish private routes for increased security; supports RFC

2547bis multiple autonomous system VPNs for added flexibility

DA - 14167 North America — Version 20 — December 9, 2013

HP 10500 Switch Series

Page 7