- ページ 5

スイッチ HP 11900のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。HP 11900 12 ページ。 2400w dc
HP 11900 にも：データシート (8 ページ)

Figure 2 Installation flow of a power supply

NOTE:

The device needs at least one power supply, so the chassis has a power supply slot

without a blank panel. For this slot, skip "Remove the blank panel" in the figure

above.

Before the installation, prepare an ESD-preventive wrist strap and a Phillips screwdriver.

Installing the power supply

To install the power supply:

Wear an ESD-preventive wrist strap, and make sure that the wrist strap makes good

skin contact and is properly grounded.

Use the Phillips screwdriver to unfasten the captive screws on the blank panel, and

remove the blank panel from the slot to be used (see callout 2 in

Figure

3).