- ページ 25

スイッチ HP 201723-B21 - HP StorageWorks Modular SAN Array 1000 Hard DriveのPDF リファレンス・マニュアルをオンラインで閲覧またはダウンロードできます。HP 201723-B21 - HP StorageWorks Modular SAN Array 1000 Hard Drive 48 ページ。 Storageworks modular smart array controller, cache, and battery replacement instructions
HP 201723-B21 - HP StorageWorks Modular SAN Array 1000 Hard Drive にも：管理マニュアル (40 ページ), リリースノート (13 ページ), クイック・スタート手順 (8 ページ), リリースノート (8 ページ), リリースノート (8 ページ), クイック・スタート・マニュアル (7 ページ), リリースノート (5 ページ), リリースノート (5 ページ), 交換手順 (4 ページ)

Power Supply/Blower Assemblies

The MSA1000 includes redundant power supply/blower assemblies.

The power supplies share the electrical load equally. If either supply fails or is

removed, the other power supply assumes the full load without interruption.

Hot-pluggability allows you to replace the failed supply without shutting down the

MSA1000 storage system.

The blowers work together to maintain an acceptable operating temperature. If

one blower operates too slowly or completely shuts off, the other blower will

begin to operate at a higher speed.

Any changes in the performance level of the power supply or blower are reported

on the LCD panel of the associated controller. For a description of the possible

informational and error messages associated with the power supplies or blowers,

see the definitions for messages numbered 400 through 499 in the HP

StorageWorks 1000 Modular Smart Array Maintenance and Service Guide.

Depending on the setup of Insight Manager 7 and System Event Analyzer,

informational and error messages about the power supplies and blowers are also

reported though these software components.

Refer to the HP StorageWorks 1000 Modular Smart Array Maintenance and

Service Guide for more information.

HP StorageWorks 1000 Modular Smart Array Reference Guide

MSA1000 Hardware Components