- ページ 31

スイッチ HP 201723-B21 - HP StorageWorks Modular SAN Array 1000 Hard DriveのPDF リファレンス・マニュアルをオンラインで閲覧またはダウンロードできます。HP 201723-B21 - HP StorageWorks Modular SAN Array 1000 Hard Drive 48 ページ。 Storageworks modular smart array controller, cache, and battery replacement instructions
HP 201723-B21 - HP StorageWorks Modular SAN Array 1000 Hard Drive にも：管理マニュアル (40 ページ), リリースノート (13 ページ), クイック・スタート手順 (8 ページ), リリースノート (8 ページ), リリースノート (8 ページ), クイック・スタート・マニュアル (7 ページ), リリースノート (5 ページ), リリースノート (5 ページ), 交換手順 (4 ページ)

MSA Command Line Interface (MSA-CLI)

The MSA-CLI is built into the MSA controller firmware and can be used to

configure, manage, and monitor all aspects of the MSA1000, including hard drive

array configuration. The CLI is accessed through a host computer connected to the

customized RJ-45Z serial port on the front of the MSA1000.

All supported operating systems can access the CLI.

HP systems Insight Manager (HP-SIM) is a client/server application used to

remotely manage HP hardware in network environments. SIM reports hardware

fault conditions (both failure and pre-failure) and collects data for reporting and

graphing. SIM also provides base-level management of HP clients, printers, and

selected storage.

HP-SIM can be used to monitor the performance of several MSA1000 Controller

parameters. The displayed parameters include CPU usage, the total number of

read and write commands processed, and the average time to process a read or

write command. Also displayed for each logical drive are the total I/O count,

number of read and write requests, and number of sectors read or written. HP

recommends using HP-SIM to monitor the performance of your drive arrays.

The Windows, Linux, and NetWare operating systems can use HP-SIM.

For more information, go to the HP_SIM web site: http://www.hp.com/go/hpsim.

HP StorageWorks 1000 Modular Smart Array Reference Guide

MSA1000 Software Tools