- ページ 3

スイッチ HP 2620 seriesのPDF 仕様をオンラインで閲覧またはダウンロードできます。HP 2620 series 13 ページ。 2620 series

ページを印刷する

Data sheet | HP 2620 Switch Series

Management

• Dual flash images

Provides independent primary and secondary operating system files for backup while upgrading

• Friendly port names

Allows assignment of descriptive names to ports

• Multiple configuration files

Are easily stored with a flash image

• Port mirroring

Enables traffic on a port to be simultaneously sent to a network analyzer for monitoring

• sFlow (RFC 3176)

Delivers wire-speed traffic accounting and monitoring, configured by the SNMP and CLI with

three terminal encrypted receivers

• Remote monitoring (RMON)

Provides advanced monitoring and reporting capabilities for statistics, history, alarms, and events

• Find, fix, and inform

Finds and fixes common network problems automatically, and then informs the administrator

NEW

Comware CLI

•

– Comware-compatible CLI

Bridges the experience of HP Comware CLI users who use the HP ProVision software CLI

– Display and fundamental Comware CLI commands

Are embedded in the switch CLI as native commands; display output is formatted as on

Comware-based switches and fundamental commands provide a Comware-familiar initial

switch setup

– Configuration Comware CLI commands

Elicit CLI help to formulate the correct ProVision software CLI command

L2 switching

• VLANs

Provide support for 512 VLANs and 4,094 VLAN IDs

• Jumbo packet support

Improves the performance of large data transfers; and supports frame sizes up to 9220 bytes

• IEEE 802.1v protocol VLANs

Isolate select non-IPv4 protocols automatically into their own VLANs

•

NEW

Per-VLAN spanning tree plus (PVST+)

Allows each VLAN to build a separate spanning tree, improving link bandwidth usage in

network environments with multiple VLANs

L3 routing

• Static IP routing

Provides manually configured routing; and includes the ECMP capability

• Routing information protocol (RIP)

Provides RIPv1 and RIPv2 routing

Security

• Access control lists (ACLs)

Provide IP L3 filtering, based on the source/destination IP address/subnet and source/destination

TCP/UDP port number

• Source-port filtering

Allows only specified ports to communicate with each other

• RADIUS/TACACS+

Eases switch management security administration by using a password authentication server

• Secure shell

Encrypts all transmitted data for secure remote CLI access over IP networks