- ページ 13

スイッチ HP 316095-B21 - StorageWorks Edge Switch 2/24のPDF リリースノートをオンラインで閲覧またはダウンロードできます。HP 316095-B21 - StorageWorks Edge Switch 2/24 32 ページ。 Edge switch release notes
HP 316095-B21 - StorageWorks Edge Switch 2/24 にも：更新マニュアル (9 ページ), マニュアル (41 ページ), マニュアル (40 ページ), リリースノート (27 ページ), マニュアル (26 ページ), リリースノート (27 ページ), リリースノート (25 ページ), 取付説明書 (24 ページ), リリースノート (23 ページ), リリースノート (23 ページ), リリースノート (22 ページ), リリースノート (23 ページ), リリースノート (19 ページ), リリースノート (19 ページ), リリースノート (18 ページ), 取扱説明書 (17 ページ), リリースノート (17 ページ), アップグレード手順 (16 ページ), 取扱説明書 (16 ページ), 取付説明書 (16 ページ), リリースノート (16 ページ), リリースノート (17 ページ), リリースノート (17 ページ), リリースノート (11 ページ)

NOTE:

Step 4 of the following procedure is not required if you are upgrading from 05.xx.xx or

later.

To safely upgrade ﬁrmware on a director, perform the following:

Upgrade HAFM software on the HAFM server/appliance to 07.01.00 (minimum).

Download ﬁrmware 05.02.00-13 using the Firmware Library option under the

Product Manager Maintenance menu.

Back up the director conﬁguration using the Backup & Restore Conﬁguration option

under the Product Manager Maintenance menu.

Using the Product Manager, execute a CTP swap:

NOTE:

You must have maintenance authorization rights to access the HAFM

Product/Element Manager menu options used in this procedure.

From Product/Element Manager Hardware view, verify that an amber LED

indicator is not displayed for either CTP card.

Right-click the CTP card you believe to be active. From the right-click popup

menu, choose FRU Properties. Verify that it is the active CTP card.

Right-click the active CTP card and choose Switchover from the popup

menu.

The director loses its Ethernet connection for a short period during the

switchover process.

When switchover occurs, the green LED illuminates on the backup CTP

card to indicate that it is now the active card.

Upgrade the ﬁrmware to 05.02.00-13 on each director using the Send option on

the Firmware Library dialog box.

Considerations for downgrading the version of ﬁrmware

Directors or edge switches are not required to be ofﬂine before performing a ﬁrmware

downgrade operation. Limitations to downgrades are clearly identiﬁed if there are any

limitations to performing the operation.

Before downgrading ﬁrmware, it is highly recommended that you back up the director

or edge switch conﬁguration. Refer to your HP StorageWorks director or edge switch

Element Manager user guide for more information. EWS also provides an option to print

or save product conﬁguration to a ﬁle. Refer to your HP StorageWorks Embedded Web

Server User Guide for more information.

HA-Fabric Manager release notes