- ページ 24

スイッチ HP 316095-B21 - StorageWorks Edge Switch 2/24のPDF リリースノートをオンラインで閲覧またはダウンロードできます。HP 316095-B21 - StorageWorks Edge Switch 2/24 25 ページ。 Edge switch release notes
HP 316095-B21 - StorageWorks Edge Switch 2/24 にも：更新マニュアル (9 ページ), マニュアル (41 ページ), マニュアル (40 ページ), リリースノート (32 ページ), リリースノート (27 ページ), マニュアル (26 ページ), リリースノート (27 ページ), 取付説明書 (24 ページ), リリースノート (23 ページ), リリースノート (23 ページ), リリースノート (22 ページ), リリースノート (23 ページ), リリースノート (19 ページ), リリースノート (19 ページ), リリースノート (18 ページ), 取扱説明書 (17 ページ), リリースノート (17 ページ), アップグレード手順 (16 ページ), 取扱説明書 (16 ページ), 取付説明書 (16 ページ), リリースノート (16 ページ), リリースノート (17 ページ), リリースノート (17 ページ), リリースノート (11 ページ)

Losing LAN connection to the HAFM appliance when logged in to HAFM

If the LAN connection to the HAFM appliance is lost while you are logged in to HAFM,

the application may stop.

Workaround

The LAN connection must be restored. Stopping HAFM has no impact on the Fibre

Channel operations of any Edge Switch or Director. Monitoring switch operations,

logging events, and implementing conﬁguration changes are interrupted only while

the LAN is not connected.

Effect of no LAN connection to HAFM appliance during boot up

If the HAFM appliance has no LAN connection while booting up, but it is connected

after booting up, the remote client sessions to the HAFM appliance are not allowed.

Also, the IP address that is displayed when you select SAN > Server Properties is

possibly incorrect.

Workaround

This is corrected by restoring the LAN connection and rebooting the appliance.

Rebooting the appliance has no impact on the Fibre Channel operations of any switch

or Director. Only monitoring switch operations, logging events, and implementing

conﬁguration changes are interrupted.

Setting HAFM appliance LAN to use DHCP is activated to wrong LAN

When setting the IP conﬁguration for an older HAFM appliance (delivered with HAFM

server boot/restore 3.01.00 Rev A or earlier) using the LCD panel, setting DHCP

conﬁguration for LAN 1 causes LAN 2, not LAN 1, to be conﬁgured for DHCP. Similarly,

setting DHCP conﬁguration for LAN 2 causes LAN 1, not LAN 2, to be conﬁgured

for DHCP.

Workaround

If you wish to conﬁgure LAN 1 for DHCP, select LAN 2 instead of LAN 1 at the start of

the conﬁguration procedure. If you wish to conﬁgure LAN 2 for DHCP, select LAN 1

instead of LAN 2 at the start of the conﬁguration procedure.

New sound ﬁles are not added to Event Manager immediately

New sound ﬁles do not display in the pull down menu of the Event Manager. They

cannot be selected for inclusion in a rule. In order for the new sound ﬁles to be

available, HAFM services must be stopped and restarted, or the HAFM appliance must

be rebooted. This is not disruptive to managed switches, but monitoring and logging

functions are interrupted while the appliance is rebooting.