- ページ 6

スイッチ HP 316095-B21 - StorageWorks Edge Switch 2/24のPDF リリースノートをオンラインで閲覧またはダウンロードできます。HP 316095-B21 - StorageWorks Edge Switch 2/24 11 ページ。 Edge switch release notes
HP 316095-B21 - StorageWorks Edge Switch 2/24 にも：更新マニュアル (9 ページ), マニュアル (41 ページ), マニュアル (40 ページ), リリースノート (32 ページ), リリースノート (27 ページ), マニュアル (26 ページ), リリースノート (27 ページ), リリースノート (25 ページ), 取付説明書 (24 ページ), リリースノート (23 ページ), リリースノート (23 ページ), リリースノート (22 ページ), リリースノート (23 ページ), リリースノート (19 ページ), リリースノート (19 ページ), リリースノート (18 ページ), 取扱説明書 (17 ページ), リリースノート (17 ページ), アップグレード手順 (16 ページ), 取扱説明書 (16 ページ), 取付説明書 (16 ページ), リリースノート (16 ページ), リリースノート (17 ページ), リリースノート (17 ページ)

edge switch release notes

— firmwareupdate.txt – (Instructions for updating Firmware)

•

Acrobat

— RP505ENU.EXE – (Windows installation file for Acrobat Reader 5.0 with

Search)

Supported Configurations

Operation of multiple switches in a fabric topology is subject to the following

topology limits. Consider the impact of these limits when planning the fabric.

NOTE: For more information about planning the fabric, refer to hp StorageWorks SAN high

availability planning guide.

•

Fabric Elements—Each fabric element is defined by a unique domain ID that

ranges between 1 and 31; therefore, the theoretical limit of interconnected

directors in a single fabric is 31. The supported limit of interconnected switches in

a single fabric is 24. Because this number is subject to change, contact your

HP authorized service representative for the current number of interconnected

switches supported in a single fabric.

•

Inhomogeneous fabric—To determine if interoperability is supported for a

product, or if restrictions apply, refer to the product publications, or contact your

HP authorized service representative.

•

Number of Interswitch Links (ISLs)—The ISL limit per Edge Switch 2/24 is 24

and per Edge Switch 2/32 is 32. For redundancy, at least two ISLs should connect

any two switch-class fabric elements. Because this number is subject to change,

contact your HP authorized service representative for the current number of ISLs

supported per switch.

•

Hop Count—The fibre channel theoretical limit of ISL connections traversed (hop

count) in a single path through a fabric is 7. The maximum supported hop count in

a single path through a fabric is 3. Because this number is subject to change,

contact your HP authorized service representative for the current hop count

supported by a single fabric path.

NOTE: The hop count is equal to the number of ISL connections traversed in a single path,

not the total number of ISL connections between devices.

edge switch release notes