- ページ 4
スイッチ HP 3600-24-SFP v2 EIのPDF 仕様をオンラインで閲覧またはダウンロードできます。HP 3600-24-SFP v2 EI 40 ページ。 3600 ei switch series
QuickSpecs
Overview
provides advanced monitoring and reporting capabilities for statistics, history, alarms, and events
Layer 2 switching
16/32K MAC address table
provides access to many Layer 2 devices
VLAN support and tagging
support IEEE 802.1Q with 4,094 simultaneous VLAN IDs
GARP VLAN Registration Protocol
allows automatic learning and dynamic assignment of VLANs
IEEE 802.1ad QinQ and Selective QinQ
increase the scalability of an Ethernet network by providing a hierarchical structure; connect multiple LANs on a high-speed
campus or metro network
Gigabit Ethernet port aggregation
allows grouping of ports to increase overall data throughput to a remote device
Internet Group Management Protocol (IGMP) and Multicast Listener Discovery (MLD) protocol snooping
effectively control and manage the flooding of multicast packets in a Layer 2 network
Layer 3 services
Address Resolution Protocol (ARP)
determines the MAC address of another IP host in the same subnet
Dynamic Host Configuration Protocol (DHCP)
simplifies the management of large IP networks and supports client and server; DHCP Relay enables DHCP operation across
subnets
Loopback interface address
defines an address in Routing Information Protocol (RIP) and OSPF, improving diagnostic capability
User Datagram Protocol (UDP) helper function
allows UDP broadcasts to be directed across router interfaces to specific IP unicast or subnet broadcast addresses and prevents
server spoofing for UDP services such as DHCP
Route maps
provide more control during route redistribution; allow filtering and altering of route metrics
Layer 3 routing
IPv4 routing protocols
support static routes, RIP, OSPF, ISIS, and BGP
IPv6 routing protocols for v2 switches
provide routing of IPv6 at wire speed; support static routes, RIPng, OSPFv3, ISIS for IPv6, and BGP4+ for IPv6
IPv6 tunneling
allows a smooth transition from IPv4 to IPv6 by encapsulating IPv6 traffic over an existing IPv4 infrastructure
Equal-Cost Multipath (ECMP)
enables multiple equal-cost links in a routing environment to increase link redundancy and scale bandwidth
Bidirectional Forwarding Detection (BFD)
enables link connectivity monitoring and reduces network convergence time for RIP, OSPF, BGP, IS-IS, VRRP, and IRF
PIM-SSM, PIM-DM, and PIM-SM (for IPv4 and IPv6)
support IP Multicast address management and inhibition of DoS attacks
Multicast Source Discovery Protocol (MSDP)
is used for inter-domain multicast applications, allowing multiple PIM-SM domains to interoperate
IGMPv1, v2, and v3
DA - 13790 North America — Version 9 — December 18, 2013
HP 3600 EI Switch Series
Page 4