- ページ 13

スイッチ HP 376227-B21 - ProLiant InfiniBand 4x Fabric Copper SwitchのPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。HP 376227-B21 - ProLiant InfiniBand 4x Fabric Copper Switch 28 ページ。 Fabric clustering system 24-port 4x fabric copper switch installation guide, march 2005
HP 376227-B21 - ProLiant InfiniBand 4x Fabric Copper Switch にも：ホワイトペーパー (13 ページ), 実施マニュアル (9 ページ)

ページを印刷する

Step 2. To install the switch with the bezel to the front of the rack, install with the flange at the front of the

switch.

You can also mount the flange toward the back if you want to mount the switch backward in the

rack such that the service-side is forward. If the intake for the fans on the switch faces the hot air

output of other equipment, the switch could endure thermal issues.

Attach the rail with 6 screws to each side of the switch in the locations shown in Figure 1-7

Screw locations are the same in the switch regardless of rail orientation.

Figure 1-7 Rail-to-Switch Attachment Locations

Bezel end

Figure 1-8 Attach Rail to Switch

Step 3. Repeat steps Steps 1 and 2 on the other side of the switch.

The two sliding rails should still be unattached.

Step 4. Loosely attach the switch with one screw through the front of each rail.

CAUTION

Figure 1-9 Loosely Attach Rail to Rack

CAUTION

Chapter 1

Temporarily support the switch until the sliding rails are attached.

Do not let the switch hang unsupported from only the fixed rail flanges.

HP-UX Integrity Installation Overview & Planning

Install HP Fabric Clustering System Switches

Attach rail to switch in

the (6) locations highlighted in black.