- ページ 21

スイッチ HP 5120 SI SeriesのPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。HP 5120 SI Series 48 ページ。 5120 si switch series
HP 5120 SI Series にも：仕様 (33 ページ)

Accessing the switch for the first time

The first time you access the switch you must use a console cable to connect a console terminal, for

example, a PC, to the console port on the switch.

Figure 20 Connecting the console port to a terminal

A console cable is an 8-core shielded cable, with a crimped RJ-45 connector at one end for

connecting to the console port of the switch, and a DB-9 female connector at the other end for

connecting to the serial port on the console terminal.

Figure 21 Console cable

A side

Pos.9

Pos.1

Connecting the console cable

To connect a terminal, for example, a PC, to the switch:

Plug the DB-9 female connector of the console cable to the serial port of the PC.

Connect the RJ-45 connector to the console port of the switch.

Main label

B side