- ページ 10

スイッチ HP 5120-24G EI TAAのPDF 設定マニュアルをオンラインで閲覧またはダウンロードできます。HP 5120-24G EI TAA 39 ページ。 Hp 5120 ei switch series
HP 5120-24G EI TAA にも：データシート (17 ページ)

ページを印刷する

%Created dir flash:/test.

<Master> dir

Directory of flash:/

-rw-

drw-

30861 KB total (20961 KB free)

To create and access the test folder under the root directory of the Flash on member switch 3:

<Master> mkdir slot3#flash:/test

%Created dir slot3#flash:/test.

<Master> cd slot3#flash:/test

<Master> pwd

slot3#flash:/test

Or:

<Master> cd slot3#flash:/

<Master> mkdir test

%Created dir slot3#flash:/test.

To copy the file test.app on the master to the root directory of the Flash on member switch 3:

# Display the current working path. In this example, the current working path is the root directory of the

Flash on member switch 3.

<Master> pwd

slot3#flash:

# Change the current working path to the root directory of the Flash on the master switch.

<Master> cd flash:/

<Master> pwd

flash:

# Copy the file to member switch 3.

<Master> copy test.app slot3#flash:/

Copy flash:/test.app to slot3#flash:/test.app?[Y/N]:y

%Copy file flash:/test.app to slot3#flash:/test.app...Done.

Configuration synchronization mechanism

IRF uses a strict running-configuration synchronization mechanism so all chassis in an IRF fabric can work

as a single node, and after the master fails, other members can operate normally.

In an IRF fabric, all chassis get and run the running configuration of the master. Any configuration you

have made is propagated to all members.

When you execute the save [ safely ] [ backup | main ] [ force ] command or the save file-url all

command, the system saves the running configuration, as follows:

•

If the configuration auto-update function (the slave auto-update config command) is enabled, saves

the configuration as the startup configuration on all member switches for the next startup.

If the configuration auto-update function is disabled, saves the configuration as the startup

•

configuration on the master for the next startup.

By default, configuration auto-update is enabled.

10105088

Apr 26 2000 13:44:57

2445

Apr 26 2000 15:18:19

Jul 14 2008 15:20:35

test.app

config.cfg

test