- ページ 4
カメラアクセサリー AQUATECH Scout & ShadowのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。AQUATECH Scout & Shadow 4 ページ。 Sound blimp
ページを印刷するInstructions
The front two button switch will allow you
to have focus on the bottom button and
shutter release on the top button. To lock
focus you must hold the bottom button
and have your camera's focusing selection
set accordingly. This shutter button is
field replaceable and is sold via AquaTech
directly.
To function properly, your Sound Blimp
requires the use of a Lens Tube that
threads to the front of the main body. Each
Lens Tube is specific to the type of lens
you are using. To attach, simply line up
the threads and screw the Lens Tube in a
clockwise direction.
The Lens Tube will thread on and after a
few turns will disengage the thread and
become looser. At this point, your Blimp
Lens Tube will move freely and will allow
you to rotate and engage your lens zoom
gear where applicable.
To remove your Tube, simply pull and spin
outward on your Tube until you feel the
Tube threads engage with the Sound Blimp
threads. You can then unscrew until the
Tube is fully removed.
Please note: sound foam is very weak as
it cannot be dense like other foams. The
more dense usually the more sound can
vibrate and exit the unit. We make the area
tight around the zoom area so the gear
can engage. The only way to avoid this
breaking down is to limit the times you
enter the lens into the tube and when you
do enter you MUST be gentle.