- ページ 7

スイッチ HP ProCurve 1600MのPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。HP ProCurve 1600M 36 ページ。 Redundant power supply
HP ProCurve 1600M にも: 仕様書 (12 ページ), リード・ミー・ファースト (8 ページ), レビュアーズ・マニュアル (27 ページ), 補足マニュアル (2 ページ), 補足マニュアル (2 ページ), インストレーション・マニュアル (28 ページ), インストレーション・マニュアル (28 ページ), クイック・セットアップ・マニュアル (2 ページ), クイック・セットアップ・マニュアル (4 ページ), ユーザーマニュアル (8 ページ), マニュアルの補足 (28 ページ), リード・ミー・ファースト (16 ページ), 取り付けと取り外し (2 ページ), インストレーション・マニュアル (12 ページ), 計画・実施マニュアル (40 ページ), 使用済み製品の分解手順 (2 ページ), インストレーション・マニュアル (46 ページ), 診断マニュアル (2 ページ), 分解手順 (2 ページ)

HP ProCurve 1600M インストレーション・マニュアル
HP Procurve Switch
10/100-TX GL Module
(J4862B)*
hp procurve
10/100-TX
gl module
J4862B
HP Procurve Switch
100/1000-T GL Module
(J4863A)
HP Procurve Switch
Gigabit Transceiver
GL Module (J4864A)
Supported HP Procurve Transceivers (as of this printing):
• 100-FX Transceiver (J4853A)
• Gigabit-SX Transceiver (J4131A or J4131B)
• Gigabit-LX Transceiver (J4132A)
HP Procurve Switch
mini-GBIC GL Module
(J4893A)*
hp procurve
mini-GBIC
gl module
J4893A
** Supported HP Procurve mini-GBICs (as of this printing):
• Gigabit-SX LC mini-GBIC (J4858A)
* This module requires switch software version G.05.02 or later to be installed in the switch.
HP Procurve Switch GL Modules
For the HP Procurve Series 4100GL Switches
Descriptions. The HP Procurve Switch GL Modules are components that you
can add to an HP Procurve GL switch to provide a variety of network connec-
tivity options. The following modules are available as of this printing:
Module
1
2
3
4
5
6
Link|Mode
7
8
9
10
11
12
Link|Mode
1
7
10/100-TX Por ts (1-24)
12
Remove network cable before removing or installing transceiver
1
2
3
Link
Link
1
2
3
Mode
Mode
• Gigabit-LX LC mini-GBIC (J4859A)
13
14
15
16
17
18
19
20
21
22
23
24
18
19
all por ts are HP Auto-MDIX
24
• 100/1000-T Transceiver (J4834A)
• Gigabit Stacking (part of the HP Procurve Switch Gigabit
Stacking Kit -- J4116A)
4
5
6
4
5
6
Description
24 twisted-pair ports with RJ-45
connectors for 10 Mbps or 100
Mbps operation over 100-ohm
unshielded (UTP) or shielded (STP)
gl
twisted-pair cable -- all ports have
module
the HP Auto-MDIX feature
6 twisted-pair ports with RJ-45
connectors for 1000 Mbps
(Gigabit) or 100 Mbps operation
over Category 5 or better 100-ohm
UTP or STP cable (category 5E
recommended for Gigabit) -- all
ports have the IEEE 802.3ab Auto
MDI/MDI-X feature
3 transceiver slots for installing
any of the supported HP Procurve
Transceivers
.
6 mini-GBIC slots for installing any
of the supported HP Procurve
mini-GBICs**.
gl
module

Descriptions

1