- ページ 14
スイッチ HP StorageWorks 2/24 - Edge SwitchのPDF リリースノートをオンラインで閲覧またはダウンロードできます。HP StorageWorks 2/24 - Edge Switch 16 ページ。 Fw 04.01.02 and sw 06.03.01 ha-fabric manager release notes
HP StorageWorks 2/24 - Edge Switch にも： リリースノート (32 ページ), リリースノート (27 ページ), マニュアル (26 ページ), リリースノート (19 ページ), リリースノート (17 ページ), リリースノート (10 ページ)
ページを印刷する
Known Issues
"Port Properties" Option may be Unavailable in Node List View
If you switch from Hardware View to Node List View, and choose the Product
menu, the Port Properties option may not be available.
Workaround
You must first select a line for a port in the Node List for the Port Properties
option to be available, no port is selected by default. Alternatively, Port
Properties may be viewed by right-clicking the line for a port in the Node List
and choosing Port Properties, or from other views like Hardware View or Port
List View.
Port Diagnostics on All Ports is not Available When All Ports of an Edge
Switch are not Installed and Enabled
The Edge Switch 2/24 and Edge Switch 2/32 basic units have 8- and 16-ports
installed, respectively. The remaining ports can be enabled by purchasing
additional ports and licenses to enable them, in 8-port increments. If all of the
ports are not installed, Port Diagnostics must be run on one port at a time, and the
option to run diagnostics on all ports is not available.
Open Systems Management Server
Under the HAFM Product Manager > Hardware View menus, the Configure >
Management Server. . .menu option will result in a pop-up dialog. This dialog
states "This feature has not been installed. Please
contact your sales representative." This feature is not currently
available.
Multiple FC HBA Ports in Separate Zones
Multiple FC HBA ports in the same host should be placed in separate zones, or
they might be perceived as potential targets (some HBAs log-in as both host and
target).
14
HA-Fabric Manager Release Notes