- ページ 31

スイッチ HP StorageWorks 8/40 - SAN SwitchのPDF リリースノートをオンラインで閲覧またはダウンロードできます。HP StorageWorks 8/40 - SAN Switch 43 ページ。 Hp storageworks fabric os 6.1.2b release notes (5697-0351, march 2010)
HP StorageWorks 8/40 - SAN Switch にも：リリースノート (30 ページ), リリースノート (29 ページ), リリースノート (32 ページ)

ページを印刷する

HP StorageWorks 8/40 - SAN Switch リリースノート

When the switch name is set using CLI and then read using the Read

Port Address Name x'B2' command to the CUP Port x'FE' it returns the

switch name with a x'7F' attach after the last character in the Switch

Name.

A failed Pause frame (sent during firmwaredownload process in

Interop Modes 2 and 3), causes a fabric rebuild.

In some instances, HCL on an HP StorageWorks 8/40 SAN switch in

Interop Mode requires the use of the -o option.

A turboramtest failure does not fully disable the port on an HP

StorageWorks 8/80 SAN switch.

Web Tools: The HP StorageWorks DC04 SAN Director attention LEDs

on the switch view GUI window do not turn amber when blade needs

attention.

N-Port between AG and Edge Switch (300) may become stuck at E-

Port Unknown state.D

After multiple successive fastboots of an HP StorageWorks DC04 SAN

Director, there was a panic due to the zone daemon dying.

FICON PTP VTS Selective Resets and Aborted sequences caused by

incorrect entry into FICON tape read pipelining.

EX_Port fails to come online after downgrading firmware from Fabric

OS 6.x to 5.3 under certain conditions.

Tstimezone settings cannot be changed or restored with config-

download.

If a large number of EX_Ports are enabled at the same time, occasion-

ally some fail due to incompatible flow control parameters.

In some instances, portshow may display inaccurate port authentic-

ation description or state after a CP failover.

Internal server ports on embedded platform: traffic may stop due to

loss of buffer credit.

Fixed in Fabric OS 6.2.0.

Workaround prior to upgrade:

Use the -o option to override the co-

operative HCL feature.

Fixed in Fabric OS 6.2.0.

Workaround prior to upgrade:

Use the -o option.

Fixed in Fabric OS 6.2.0.

Workaround prior to upgrade:

Reboot the switch.

Fixed in Fabric OS 6.2.0.

Workaround prior to upgrade:

Disable and then enable the port on

the AG to bring the port back online

as an N-Port.

Fixed in Fabric OS 6.2.0.

Workaround prior to upgrade:

Fastboot a single time.

Fixed in Fabric OS 6.2.0.

Workaround prior to upgrade:

Remove the ts.tz parameter in the

config file and then download.

Fixed in Fabric OS 6.2.0.

Workaround prior to upgrade:

Portdisable and then enable the

EX_Ports that failed.

Fixed in Fabric OS 6.2.0.

HP StorageWorks Fabric OS 6.2.0b release notes