- ページ 20

スイッチ HP StorageWorks Core Switch 2/64のPDF リリースノートをオンラインで閲覧またはダウンロードできます。HP StorageWorks Core Switch 2/64 20 ページ。 Director power cord advisory instruction
HP StorageWorks Core Switch 2/64 にも：クイックスペック (13 ページ), リリースノート (27 ページ), リリースノート (24 ページ), リリースノート (13 ページ), リリースノート (11 ページ), インストラクション (1 ページ)

Known Issues

Director Properties Description May Be Incorrect

The text shown in the Description field of the Director Properties panel for the

Director 2/140 may be incorrect. It may show SAN Director 64. This has no

effect on the operation of the Director 2/140. This is a user-configurable

description for the director, and may be changed to whatever you want by

choosing Configure > Identification using HAFM, or by choosing Configure >

Director > Identification using the Embedded Web Server interface.

IML is Required After Performing a Configuration Reset

If a Reset Configuration is performed on a Director 2/140 to reset the director to

factory configuration, an initial machine load (IML) is required to be performed to

complete the process. This is done by pressing the white button on the front of

either CTP card for more than three seconds. This can also be accomplished by

turning the power to the Director 2/140 off and then back on.

Director Release Notes