- ページ 27
スイッチ HP StorageWorks FC Entry Switch 8BのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。HP StorageWorks FC Entry Switch 8B 44 ページ。 Isl trunking user's guide (version 3.0)
HP StorageWorks FC Entry Switch 8B にも： ユーザーマニュアル (44 ページ), ユーザーマニュアル (38 ページ), ユーザーマニュアル (38 ページ), ユーザーマニュアル (37 ページ), ユーザーマニュアル (30 ページ)
ページを印刷する
Example 1. The following command displays all of the end-to-end monitors on port 3 at an interval
of once a second. (In this example, there are three monitors on port 3, numbered 0, 1, and 2.)
sw1:admin> perfShowEEMonitor 3, 1
perfShowEEMonitor 3, 1: Tx/Rx are # of bytes and crc is # of crc errors
0
------------
------------
crc
Tx
Rx
crc
============
============
0
0
0
0
0
53m 4.9m
0
0
53m 4.4m
0
0
53m 4.8m
0
0
53m 4.6m
0
0
53m 5.0m
0
0
52m 4.6m
0
Example 2. The following command displays the cumulative counters on all end-to-end monitors
defined on port 3. The KEY column contains the monitor number.
switch:admin> perfShowEEMonitor 3
There are 3 end-to-end monitor(s) defined on port 3.
KEY
SID
DID
OWNER_APP
--------------------------------------------------------------------------------------------------------------
0
0xb1300
0xb23ef
TELNET
1
0xb1200
0xb22ef
TELNET
2
0x58e0f
0x1182ef
WEB_TOOLS
Deleting End-to-End Monitors
Use the perfDelEEMonitor command to delete an end-to-end monitor on a port. Indicate which
monitor to delete by specifying the monitor number that was returned by a previous
perfAddEEMonitor command.
Note:
Example 1. The following command deletes the end-to-end monitor number 0 on port 2:
sw1:admin> perfDelEEMonitor 2, 0
End-to-End monitor number 0 deleted
Example 2. The following command deletes all of the end-to-end monitors on port 2:
sw1:admin> perfDelEEMonitor 2
This will remove ALL EE monitors on port 2, continue? [y|n]y
Advanced Performance Monitoring User's Guide
1
2
------------
Tx
Rx
crc
Tx
============
0
0
0
0
53m 4.9m
0
53m 4.9m
53m 4.4m
0
53m 4.4m
53m 4.8m
0
53m 4.8m
53m 4.6m
0
53m 4.6m
53m 5.0m
0
53m 5.0m
52m 4.6m
0
52m 4.6m
OWNER_IP_ADDR
N/A
0x00000004d0ba9915
N/A
0x00000004d0baa754
192.168.169.40
0x00000004d0bade54
If you do not specify a monitor number, then all end-to-end monitors on the port are
deleted.
Using Advanced Performance Monitoring
Rx
0
TX_COUNT
RX_COUNT
0x0000000067229e65
0x0000000067229e87
0x0000000067229e87
3
CRC_COUNT
0x0000000000000000
0x0000000000000000
0x0000000000000000
3-7